Tss can installed on the t3

[Shane_Sharp]

Got the tss can thrown on today can't wait to hear what it sounds like

 

[Shane_Sharp]

Anyone know wether or not you use the bottom exhaust spring loop on the tss can??

 

[sick1]

yes take a small pice of alumininum angle drill two holes rivet it to the pan and hook the spring up.. if not it will vibrate and oval out your pan.

 

[MK4TDI]

This is all I did with mine.



And the sound is good, just quite loud to most people around you.

 

[Bnorth]

I'll take the guessing work out it's real loud.

 

[NoBrakes!]

I though that was the point? lol

 

[Bnorth]

I though that was the point? lol

We're our own worst enemies and noise is one of the biggest reasons for that.

 

[stormtrooper]

Yup. Ear piercing. You will need to warn people if you are starting it up in an enclosed area
. Ridiculously loud. Their tunnel dumps sound pretty good though.

 

[oler1234]

This is all I did with mine.



And the sound is good, just quite loud to most people around you.

you should really put a spring tab on there. If that spring has any kind of tension it will wear through that aluminum. As well put some kind of donut under that flange on the can. This not on seals it but stops all the aluminum chaffing you have going on there.

as for noise, I thought it was pretty quiet really. But I did just come off a big bore with jaws twin pipes.

 

[RaspberryNytro]

Got the tss can thrown on today can't wait to hear what it sounds likeView attachment 177504View attachment 177505

I wondered what this wrap would look like on the yellow T3....

 

[InFeRnO]

Got the tss can thrown on today can't wait to hear what it sounds likeView attachment 177504View attachment 177505

It roars man. Lol. It's very loud but sounds great in the etec. Been running it for two years and I get a lot of comments on how ignorant the sound is. Don't care. I love it.

 

[neilsleder]

Yup. Ear piercing. You will need to warn people if you are starting it up in an enclosed area
. Ridiculously loud. Their tunnel dumps sound pretty good though.

You like the sound the tunnel dump makes? I think it's the most hideous sound a sled can make! Lol but that's just me.


Sent from my iPhone using Tapatalk

 

[maxwell]

You like the sound the tunnel dump makes? I think it's the most hideous sound a sled can make! Lol but that's just me.


Sent from my iPhone using Tapatalk

It's terrible. Like someone pulled a plug wire off

 

[neilsleder]

It's terrible. Like someone pulled a plug wire off

The best way to describe it is on the movie dumb and dumber when Lloyd asks that hit man if he wants to here the most annoying sounds in the world. It's that sound!


Sent from my iPhone using Tapatalk

 

[Absledder]

Yup. Ear piercing. You will need to warn people if you are starting it up in an enclosed area
. Ridiculously loud. Their tunnel dumps sound pretty good though.

Yeah it's tolerable on a mountain but loading into a trailer or worse yet a garage with a cement floor it's pretty rough on the ears

 

[stormtrooper]

The best way to describe it is on the movie dumb and dumber when Lloyd asks that hit man if he wants to here the most annoying sounds in the world. It's that sound!


Sent from my iPhone using Tapatalk

It's different than a typical 2 stroke can for sure. Maybe that's why it interests me. But I don't think I could bring myself to cut that hole in the tunnel on a new sled. Same reason I didn't put one on my m1000 back in the day. The design is solid and exhaust powder bog free.

I obviously don't own one, but have a riding partner that does. I think his kind of sounds like a four stroke. I had the traditional loud tss on a previous sled ..... And I don't think I could go back to that racket. Can take it in small doses but not all day. I'll stick with my mbrp cans for now.

 

[DownhillBill]

Drilled out the old spring bracket and re-mounted it. Can doesn't move at all!

 

[Marley]

<div id="fb-root"></div> <script>(function(d, s, id) { var js, fjs = d.getElementsByTagName(s)[0]; if (d.getElementById(id)) return; js = d.createElement(s); js.id = id; js.src = "//connect.facebook.net/en_US/all.js#xfbml=1"; fjs.parentNode.insertBefore(js, fjs); }(document, 'script', 'facebook-jssdk'));</script>
<div class="fb-post" data-href="https://www.facebook.com/revelstoke.snowmobile.club/photos/a.232074600277042.1073741828.230859313731904/405895969561570/?type=1" data-width="466"><div class="fb-xfbml-parse-ignore"><a href="https://www.facebook.com/revelstoke.snowmobile.club/photos/a.232074600277042.1073741828.230859313731904/405895969561570/?type=1">Post</a> by <a href="https://www.facebook.com/revelstoke.snowmobile.club">Revelstoke Snowmobile Club</a>.</div></div>

 

[MK4TDI]

^^^^^
Now that's a bunch of jibberish

 

[SidewaysInto3rd]

https://www.youtube.com/watch?v=lGCTPOAn7x8&list=UUMZ5HpyscICKZ9ujZNglRKA&index=2

sounds good to me !

https://www.youtube.com/watch?v=9UUmeLOyhU8&index=3&list=UUMZ5HpyscICKZ9ujZNglRKA