I have a 2014 Triton ATV trailer, flat deck. Does anybody know who can install a nose shield (a nose box would be awesome as well)? All the rocks and debris from the road are chipping the front exposed side of my quad wile driving. Forgot to mention I live in Edmonton. Thank you so much.
Triton trailer modification
- Thread starter oxygen4oz
- Start date
the_real_wild1
Active VIP Member
If it is the v nose trailer I have the front ramps I'd sell for $500. Here is a pic of them and if your trailer is the same.
- Staff
- #4
- Joined
- Oct 21, 2006
- Messages
- 48,082
- Reaction score
- 32,189
- Location
- Edmonton/Sherwood Park
- Website
- www.bumpertobumper.ca
how good do they work to prevent water/mud spray?
Mine work good. Only thing I need to do is put some mud flaps on my truck. The spray from the tire comes up between the tamer and bumper. But I modifyed mine they were for a diffrent style of hook up that brought them right up to bumper. The ones I see that properly fit work great. I never see a sign of dirt on the trailers. I work in a rv park so I see a lot of them
Sent from my SGH-I337M using Tapatalk
Sent from my SGH-I337M using Tapatalk
I made a sweet set up for my 3/4 ton when I had it. It had the over sized receiver so had to adapt it down to the 2" receiver. On that adapter I welded a bar across it to hold some belting material full width. It was blowing up in the air a bit so I put another length across but only 3/4 height. I had a cut out through the rubber for the 2" receiver to go through and room for safety chains to go through as well. Was a sweet set up. I let it go with the truck (Dad bought it). So now I have to figure out how to do something similar on this 1/2 ton with no adapter as it is 2" receiver.
Similar threads
