TREES, STUMPS...and anything related

ferniesnow

I'm doo-ing it!
Joined
Dec 2, 2008
Messages
112,522
Reaction score
86,570
Location
beautiful, downtown Salmon Arm, BC
Yes pretty far away. Think this log is worth anything?

Its about 12 feet long and 18inch diameter. Manitoba maple.

I dont have a saw mill, my dad might get one... but was thinking just fire wood, but it is a nice looking log though.
Im sure you could do a decent job with a chain saw; chalk lines and a ripping chain. Give it a try. You have nothing to lose. If it doesn't work out, then firewood.
It you get it into something similar to a board, let it dry out in a cold building. Then hit it with a planer. You may find a new love and it won't cost you anything.
 

Legend14

Active VIP Member
Joined
May 4, 2020
Messages
1,115
Reaction score
3,625
Location
Hills
Yes pretty far away. Think this log is worth anything?

Its about 12 feet long and 18inch diameter. Manitoba maple.

I dont have a saw mill, my dad might get one... but was thinking just fire wood, but it is a nice looking log though.
You could make a sh!t ton of wall clocks lol, ferniesnow has a great idea too too chain mill something
 

Legend14

Active VIP Member
Joined
May 4, 2020
Messages
1,115
Reaction score
3,625
Location
Hills
Actually I forgot nobody now can tell time on a wall clock anymore
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,696
Reaction score
70,231
Location
Local
Actually I forgot nobody now can tell time on a wall clock anymore
Yeah its a lost art haha. I like em still, i collect mechanical watches.

Not sure i want to be a clock maker though haha


Might give the board thing a try though.
 
Last edited:

Beer Slayer

Active VIP Member
Joined
Dec 2, 2018
Messages
1,417
Reaction score
3,441
Location
Great Lakes
Got back into this SOB on the weekend...didn't seem to go away over the winter.
Came across a few buried items...steel pail, large rocks, copper spoon, and a spring/hinge thingy?
 

Attachments

  • IMG_2548 (1).JPG
    IMG_2548 (1).JPG
    484.7 KB · Views: 151
  • IMG_2557 (1).JPG
    IMG_2557 (1).JPG
    610 KB · Views: 149
  • IMG_2590.JPG
    IMG_2590.JPG
    589.3 KB · Views: 136
  • IMG_2591.JPG
    IMG_2591.JPG
    602.2 KB · Views: 154

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,696
Reaction score
70,231
Location
Local
Did you rent that stump grinder or buy it?

Im debating renting one buying one, or hiring someone.

Only have a couple stumps to do right now, but there is always more..
 

Beer Slayer

Active VIP Member
Joined
Dec 2, 2018
Messages
1,417
Reaction score
3,441
Location
Great Lakes
Did you rent that stump grinder or buy it?

Im debating renting one buying one, or hiring someone.

Only have a couple stumps to do right now, but there is always more..
My BIL runs a Stephensons Rental...got the family discount. Worked really well!
This bitch took my brother and I nineteen hours+ and sixty plus wheel barrels of wood chips/dirt.
Went twelve to sixteen inches down, going to fill with A-gravel/screenings
 

Beer Slayer

Active VIP Member
Joined
Dec 2, 2018
Messages
1,417
Reaction score
3,441
Location
Great Lakes
I have a couple stumps to remove, they are very close(touching) the house.

Dont want to use a stump grinder, because its so close to the house.

Pulling them out with a skid steer isnt a great option either really.

So has anyone here had any luck drilling holes into a stump and dissolve it with chemicals so that it can be easily removed with an axe?

If so what chemical did you use?

Any info or other ideas would be great.



I might try digging them out with.a shovel
As you can see I started digging/vacuuming then chain sawing... spent a lot of time sharpening chains.
I thought the same thing, getting to close to the fence and tight quarters. I stuck a piece of plywood up against the fence to protect it...didn't need it.
You can get pretty close to whatever...guard gets in the way of hitting anything. You have to tip it back pretty high to hit anything.

The drilling and chemical route...I think you'll be dead before the tree lol

I'll see if I can get a better pic of the fence/stump tomorrow...it snowed yesterday.
 

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,696
Reaction score
70,231
Location
Local
As you can see I started digging/vacuuming then chain sawing... spent a lot of time sharpening chains.
I thought the same thing, getting to close to the fence and tight quarters. I stuck a piece of plywood up against the fence to protect it...didn't need it.
You can get pretty close to whatever...guard gets in the way of hitting anything. You have to tip it back pretty high to hit anything.

The drilling and chemical route...I think you'll be dead before the tree lol

I'll see if I can get a better pic of the fence/stump tomorrow...it snowed yesterday.

Yeah the one that was super close to the house is gone now. Just chipped away at it. It was small though, only about a foot in diameter.

The other one i need to do is a bit bigger and will need a stump grinder forsure.

Its not real close to the house, so should be easy.
 

Beer Slayer

Active VIP Member
Joined
Dec 2, 2018
Messages
1,417
Reaction score
3,441
Location
Great Lakes
Pic of the grinder. This one had an eighteen horse Honda on it, we used 2.5 tanks of gas which I thought was pretty good for two solid days of work..

This is how close we got to the fence
 

Attachments

  • IMG_2549.JPG
    IMG_2549.JPG
    681.3 KB · Views: 107
  • IMG_2600.JPG
    IMG_2600.JPG
    492.3 KB · Views: 113

lilduke

Active VIP Member
Joined
Sep 15, 2009
Messages
19,696
Reaction score
70,231
Location
Local
I can buy one similar to that for around 2000$.

Not the kinda thing ill need all the time though, so might price out renting one, or getting someone else to do it.


I like buying tools though lol


So might buy one, then try to sell it after im done.
 
Top Bottom