Transporting in back of truck - finally a decent solution!!

[canadian madman]

I know there has been alot of discussion about this...but i just discovered this company and their products are awesome...haven't seen anyone mention them yet so i figured i'd get the word out...they seem to have different products that when used together can cover all of our needs...like being able to still pull a trailer with a UTV in the back...anyways....check them out...going to try and make it down to one of their dealers this weekend (riverside) and check out the quality in person

i attached a couple of pics from their site, but for the full effect check out the webiste @

 

[Snowdin]

Those two cables holding the tail gate, are they really strong enough to hold all that weight?

 

[Summitric]

That puts a lot of weight behind the rear bumper..... With a trailer on? Wowzers!!! I'd like to see that run across a weigh scale!!!

 

[new24stroke]

The picture with the ramps in the back does not get it high enough to keep the tires in the box.They will sit on the rear bump.I tried a set.It need to be higher and they are 400-500 bucks.There is a guy in Red Deer that builds on out of steel and to your specs for 280.00

 

[canadian madman]

if you look on their site they also have heavy duty chains that replace the factory tailgate covers if you need the extra support...

i'm assuming that is a rhino in the pic...if that fits then my RZR-S should fit no problem...have to check the specs to see the dimensions on both

 

[canadian madman]

hey new24stroke - do you have any contact info for this guy? i like the price does he have a website? or is it just a guy with a welding machine that does this on the side?

 

[new24stroke]

steelworks@live.ca is his email address

 

[canadian madman]

steek? or steel? cause steel would make more sense

 

[new24stroke]

steel sorry

 

[porkhaaks]

MY Rhino fits in the Box, without a problem. It is on a ramp in the box. Oh it is just a wooden Ramp. COST about CHEEP. not sure if I have a pic. I will try and get one up soon. The main thing is it works great, and there is room under the RHINO for lots of stuff. OH this is in a LONG box... with the tail gate closed.

 

[arff]

The bolts holding the tail gate cables do break.
Be careful if you add chain,still a small bolt.

 

[gforce]

i dont have a pic but i made a steel box extender that fits into the sides of my hitch and 1 pce goes into the receiver to take the bounce out and i can fit my grizzly and the wifes 650 outty end to end in the box..thing is the truck is a 1 ton dually dodge..so the million pound engine in it compensates for the extra weight behind the rear wheels..it consists of of 8 pces that when apart i store it in a box at the front of the box and it only takes up 8" of space..with the 5th wheel toy hauler its nice if you want to go for a day trip it takes 10 min to pull the 5th wheel hitch out and install what we named the rydon box extender..we even put a chrome checker plate tail light panel on the rear and it plugs into the trucks trailer plug..funny every time we stop somewhere there is always someone crawling under my truck to see how we made it. 2 bolts and 2 pins hold everything in place...with a unit like this a person could fit a rhino in a shortbox no problemo.

 

[porkhaaks]

Got the PIC's up, cheap wooden Ramp for long Box.... just go back a few posts

 

[Albertan]

I came across this the other day while shopping for a full cage for my Rhino. It looks like it would work well. I might be ordering a cage from these guys so if someone wanted to split shipping let me know. e-mails are probably best. Not sure how much I'll be on this site. Cheers.

 

[canadian madman]

ya those are a good idea too...but you can't haul a trailer with that set up...so no good for me, but good for some people i'm sure

 

[porkhaaks]

Camrose Cycle has full roll cages for RHINO's also....

 

[Albertan]

Thanks for the heads up. I'll have to give them a call.

 

[Albertan]

I haven't contacted them yet but is this the same company? They look to be of excellent quality. They sure don't give them away though. Oh well it's only money.