Trailer tire sticks out further than the other

[09 arctic cat m8]

Ya I can see it's bent from tire to tire its way further out and tipped in

 

[Ronaha]

I think new bare 3500 axle without hubs is $230

 

[arff]

I think new bare 3500 axle without hubs is $230

Not sure of that price seems low.

Just had trailer repaired and it was a lot more than that.

 

[neilsleder]

Not sure of that price seems low.

Just had trailer repaired and it was a lot more than that.

For a 3500 with no brakes that's the price, you could find it cheaper. But a axles with brakes it's much more.

 

[09 arctic cat m8]

Well thanks everyone to who replied, I'm gonna haul it over to a mechanics shop today and see what he can do about it

 

[imdoo'n]

 

[Mike270412]

Take it to a trailer place,not just a mechanic shop.

Well thanks everyone to who replied, I'm gonna haul it over to a mechanics shop today and see what he can do about it

 

[arff]

Take it to a trailer place,not just a mechanic shop.

Mine is correct.

I was very happy with trailer shop.

 

[09 arctic cat m8]

I got a friend who's pretty talented and is certified so we'll see what he says, I believe all of yous on here, I just can't take it to a trailer shop cause there's not many where I'm at, like I spoke to a fella at fleet in reddeer he said they can bend it back but the first pot hole I hit itll be back the way it is

 

[arff]

I got a friend who's pretty talented and is certified so we'll see what he says, I believe all of yous on here, I just can't take it to a trailer shop cause there's not many where I'm at, like I spoke to a fella at fleet in reddeer he said they can bend it back but the first pot hole I hit itll be back the way it is

I hope it works out.

I burnt off 4 tires in 4 months on our enclosed trailer.

Had it taken in and axle tube bent. Front one.

trailer 5 years old. replaced tube hubs bearings brakes and electric brake battery. Also replaced tires.

Not cheap but I am happy with cost and repair.

 

[09 arctic cat m8]

Thanks everyone

 

[09 arctic cat m8]

So guys what we found was the axles are not lined up they're both angled towards the ditch, we measured from the plumb line off the king pin on the trailer, I'm out 1/2, so how many of you think that moving the axle pin in the middle of the ubolt plate will actually make a difference, because there's adjustment room on the ubolt plate, should the axles be equal measurement from spindle to spindle, on both sides, as well as the centering pin on the leaf spring pack,, will making all the same pins on the hole , correct my problem

because, my bearings are seated out, the only thing he found was that they weren't straight they're both angled towards the ditch which is why I would always have it correct myself, taking this trailer to a trailer shop, when they make everything equal measuring all the same that should fix my issue right

 

[the_real_wild1]

They should actually be pointing slightly to the crown not straight.