Trailer tail light help

jwood99

Active member
Joined
Oct 7, 2009
Messages
121
Reaction score
28
Location
Sk
Hi

Today I was going over my trailer and noticed that the rear right signal wasn't working. The running lights on the same light work though. I checked the fuse on my truck for the right trailer signal and it was good. Also all the other lights on my trailer work. Just looking for some help, not the best with wiring.

Thanks
 

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,479
Reaction score
29,336
Location
Parkland County
Hi

Today I was going over my trailer and noticed that the rear right signal wasn't working. The running lights on the same light work though. I checked the fuse on my truck for the right trailer signal and it was good. Also all the other lights on my trailer work. Just looking for some help, not the best with wiring.

Thanks

Just a thought, have you checked the bulb?
 

jwood99

Active member
Joined
Oct 7, 2009
Messages
121
Reaction score
28
Location
Sk
lol yea should have mentioned that i checked the bulb as well
 

Doof

Active VIP Member
Joined
Oct 24, 2011
Messages
150
Reaction score
210
Location
Drayton Valley, AB
Does the light work when you apply the brakes? If not, you're problem is most likely within your trailer connector.
 

Stompin Tom

Active VIP Member
Joined
Jun 7, 2009
Messages
3,787
Reaction score
8,138
Location
BC
Just plan your trips with all left turns, problem solved.
 

RMK Junky

Active VIP Member
Joined
Mar 15, 2009
Messages
3,258
Reaction score
1,044
Location
Grande Prairie AB.
Website
www.snowandmud.com
It's either in the pigtail or plug connection. Check the pig tail with a test light for power. You can spread the prongs with a small flat srew driver to help with connection. Be carefull here because they will break if spread to far.
 

Bullseye

Active VIP Member
Joined
Dec 12, 2008
Messages
423
Reaction score
138
Location
Central Alberta
It's either in the pigtail or plug connection. Check the pig tail with a test light for power. You can spread the prongs with a small flat srew driver to help with connection. Be carefull here because they will break if spread to far.

I do that but I also spray both the pig-tail and the truck with WD-40. Most times when I have lighting problems it a bad connection. Hope you figure it out....cause lights can be a pain in the donkey !!!
 

jay

Active VIP Member
Joined
Jan 21, 2007
Messages
232
Reaction score
47
Location
edmonton
is your truck a dodge there knowen for that mine was a 2003 and the problem was in the fuse box and was $500
 

Bernoff

Active VIP Member
Joined
Mar 11, 2010
Messages
1,386
Reaction score
1,338
Location
Edmonton
90% of the time it is a bad ground wire. I always try to look for the simple and easy to get at stuff first.
 
Top Bottom