Tki belt drive conversion

snowrider87

Active member
Joined
Oct 24, 2013
Messages
27
Reaction score
16
Location
chipman
Looking for some input on the TKI belt drive kit for my 19 pro, it's a 155 with 3" I like the ease of having a belt over the chain case, any input would be great, especially with what gearing I should go with
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,781
Reaction score
8,073
Location
Calgary/Nelson
We have them in Calgary if you want to take a look at them. Sale is on. 10% off for March if you tell us you saw it on S&M.
 

snowrider87

Active member
Joined
Oct 24, 2013
Messages
27
Reaction score
16
Location
chipman
What kind of riding do you mostly do? What area?
Well currently just got this sled, but have plans on heading up to Vale, revy, sicamous
The group I ride with goes that way. As well it will be used on flat ground here in alberta as well
 

kanedog

Active VIP Member
Joined
Feb 3, 2015
Messages
3,142
Reaction score
8,636
Location
Kanedog 2015-2019, thanks for the good times S&M!
With a 3” 155 for Mountains I would do a 26 top gear. It will be snappy.
For the flatlands, I would do a 28 top gear. It’s an easy 10 min swap.

Tom has an exchange type program so if you want to try other gears, it won’t break the bank.

No guarantee on the results tho. Proceed at own risk! Haha

Post your results and help fellow S and M’s learn! Happy tuning!
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,781
Reaction score
8,073
Location
Calgary/Nelson
With a 3” 155 for Mountains I would do a 26 top gear. It will be snappy.
For the flatlands, I would do a 28 top gear. It’s an easy 10 min swap.

Tom has an exchange type program so if you want to try other gears, it won’t break the bank.

No guarantee on the results tho. Proceed at own risk! Haha

Post your results and help fellow S and M’s learn! Happy tuning!

For the chaincase to belt conversion the brake rotor is on the outside of the top gear so it is a little harder to change the top gear as you need to remove the brake caliper each time you want to remove the gear.

I would say 26 top, for a 155 is for 2.42:1 (equivalent to 8 tooth calculated) 58:26 = 2.23 then divide by .92 for 7 tooth 3" pitch.

You don't want to go too fast with a 3" track anyway as you could spit lugs off.
 
Top Bottom