Tires, again.

DRD

Active VIP Member
Joined
Oct 21, 2008
Messages
2,755
Reaction score
5,457
Location
Red Deer County
I've burned up lots of m55's as well, one of the better ones I've tried


Sent from my iPhone using Tapatalk
 

butters

Active member
Joined
Nov 16, 2011
Messages
143
Reaction score
66
Location
northern alberta boonies
Anyone ever try dick cepek fun country's? I was looking at putting some 305/70r18 on my new rims when they come in.

I am running the FC2's right now. Not loud, no balancing issues. They are on a 3500 dodge diesel and I have 70000 km on them. I expect they will last til 100000km. I'll be running them again. Amazing tire IMO
 

Culvert

Active VIP Member
Joined
Jan 4, 2007
Messages
1,040
Reaction score
251
Location
Cold Lake, Alberta
Whos got the best pricing on Toyo CT's or Goodyear Duratracs? Looking for new rubber on an 06 F350. 275-70/18"
 

Moose

Active member
Joined
Jan 21, 2007
Messages
52
Reaction score
26
Location
Islay
I just ordered another set of Kelly safari tsr's. got 110000km on the set on my truck. very happy with them
 

GRD

Moderator
Moderator
Joined
Nov 14, 2006
Messages
3,008
Reaction score
317
Location
Calgary
I just ordered another set of Kelly safari tsr's. got 110000km on the set on my truck. very happy with them
I have these on my 2011 Chev 3500 and don't care for them much. The millage is not issue. The noise is brutal and I find them terrible in the snow and ice.
 

mb1

Active VIP Member
Joined
Oct 26, 2007
Messages
777
Reaction score
153
Location
Edmonton
Any of you sipe the mud type tires? I siped a set of toyo MT myself cause they were already used a bit and nobody would put them on a machine, but they were decent in the snow after that. I did a set of M55 as well. ImageUploadedByTapatalk1410533429.138371.jpg


'12 T4
Husaberg 570FE
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,845
Reaction score
21,061
Location
Salmon Arm
Any of you sipe the mud type tires? I siped a set of toyo MT myself cause they were already used a bit and nobody would put them on a machine, but they were decent in the snow after that. I did a set of M55 as well. View attachment 173601


'12 T4
Husaberg 570FE
I siped my duratracs last year. Made a pretty good difference in the winter.
 

Driftingbig

Active member
Joined
Oct 1, 2011
Messages
36
Reaction score
25
Recently bought a set of Duratracs for my 2500hd gasser and find there is alot of sidewall sway. Im running 45psi in the front and 55psi in the rears. Stock tire size. Anyone else have this issue? Will airing them up help?
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,671
Reaction score
8,160
Location
Stettler Alberta
Recently bought a set of Duratracs for my 2500hd gasser and find there is alot of sidewall sway. Im running 45psi in the front and 55psi in the rears. Stock tire size. Anyone else have this issue? Will airing them up help?

I found that also. I thought maybe cause they were softer rubber. Running about the same pressure as you to
 

Driftingbig

Active member
Joined
Oct 1, 2011
Messages
36
Reaction score
25
My brother runs them on his F350 dually welding rig and said to bump the pressure up to 75psi or so and it will help. Which might help as on my older 2500 i ran wrangler all terrains at 70psi with no sway. I think i will bump the pressure up and see.
 

Driftingbig

Active member
Joined
Oct 1, 2011
Messages
36
Reaction score
25
I thought that was low as well but at 45/55 thats right where the tps sensors are rated for. I will double check the door stickers to make sure there the right sensors.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,570
Reaction score
17,029
Location
DA Moose B.C
45 & 55 sounds real low for a 2500. Check your door sticker, but I'm betting they should be run at something like 55 & 80. Betting that'll make a world of difference.
But with 80 in the rear, rides like a lumber wagon , wears the rears way to fast, a dealer can program them down to 35 all 4 and up

A gas pickup 45 psi all 4


A diesel pickup 55 all 4, and bump rear if hauling something heavy for both
 

Driftingbig

Active member
Joined
Oct 1, 2011
Messages
36
Reaction score
25
I can handle the lumber wagon feel and faster tire wear to get ride of sway. Checked the door, factory say 50 in the front 72 in the rear. Will be bumping up the pressure and getting tps sensors adjusted.
 

347strokin

Active VIP Member
Joined
Sep 4, 2008
Messages
673
Reaction score
669
Location
Peachland, BC
But with 80 in the rear, rides like a lumber wagon , wears the rears way to fast, a dealer can program them down to 35 all 4 and up

A gas pickup 45 psi all 4


A diesel pickup 55 all 4, and bump rear if hauling something heavy for both

100% agree.
 

-lenny-

Active VIP Member
Joined
Mar 24, 2011
Messages
1,099
Reaction score
1,642
Location
Whitecourt
Check the tire sidewall to see what the maximum pressure for the tire is. The door sticker is only good for factory wheels and tires.
 
Top Bottom