stock tunnel mod

[marcush]

hi there . looking for some ideas on moding my stock tunnel? better boards already, looking for ideas on the azz end! pics would be great! thanks for any help. oh ya 08 nitro mtx

 

[DUSTINSPELLMAN]

Van Amburg Enterprises
they make sum nice stuff for tunnels
or check out CR racing

 

[Uzeste]

I cut mine my self, works really good in the deep powder. Sled wont float out anymore

 

[marcush]

looks good , what do you have for rear wheels and axle?

 

[Big A]

You should check out Woodies and Evan3000, they both have some tunnel mods that look pretty good. The only thing you'll have to watch is the jumping, even with extra stiffening after I cut mine and modded it, it still bent, I'm now going with a CR.

 

[Uzeste]

:dMy wheels are 8" for APP in saint albert I believe and I am running a freedom axle sled and wheels are forsale it ya want it.

 

[powder79]

timber sled, better boards cat rails

 

[SLEDBUNNYRACING]

That's still one of the sweetest "home mods" I've seen.

\

I cut mine my self, works really good in the deep powder. Sled wont float out anymore

 

[marcush]

thanks! this is exactly what i've been looking for . what drop brackets? is it still quite solid?

 

[powder79]

I'm running timber sled drop brackets right now, waiting for oft racing to make there's it is going to be the same size as stock and use stock holes but way lighter. it seem really solid reinforced the crap out of it and using oft racing drop brackets i think will also strengthen the tunnel

 

[SNAFU]

BDX Bumper from an Actic Cat 1M. The 1M and Nytro tunnels are the same width. The nytro running boards are wider so it takes some triming and re-work of the edge cap to make everything fit. Timbersled skid and drop brackets.

The Better Boards are a huge improvement over stock. No more slipping. The tunnel mod and bumper seem plenty strong.

I am currenty working on an under tunnel exhaust.

 

[marcush]

any chance you have close ups of where you cut and reinforsed? or during your mod?

 

[marcush]

thanks for the ideas ! i'll make sure to post mine once its compleat and maby during!

 

[macsummit]

any chance you have close ups of where you cut and reinforsed? or during your mod?

here is a pic of my nytro

 

[all-4-stroke]

timber sled, better boards cat rails

did u mod your tunnel extension on your nytro's? or was that part of a kit? looks tight.

 

[powder79]

did u mod your tunnel extension on your nytro's? or was that part of a kit? looks tight.

there was no kit for what I did. I also kicked the tail up a few degrees. oft racig was going to do a kit then the 2010 came out.

 

[snowseeker]

hi there . looking for some ideas on moding my stock tunnel? better boards already, looking for ideas on the azz end! pics would be great! thanks for any help. oh ya 08 nitro mtx

At the show Rat sled had after market running boards that had the kick up and the running board looked awesome as there wouldnt be any snow build up. They were $480 and looked awesome.

 

[all-4-stroke]

there was no kit for what I did. I also kicked the tail up a few degrees. oft racig was going to do a kit then the 2010 came out.

so i take it you cut the extension a little to get that slim end look?

 

[Washy]

Check out ratsled.com under tunnel accessories, by far the best tunnel mod I've saw yet. This is the one that is talked about above.