- Admin
- #21
Mine are still in the box in the house, its too damn cold outside to install them!
https://www.airliftcompany.com/products/air-springs/loadlifter-5000-ultimate/
Stiffen up the back end of a Half Ton
- Thread starter Summit X
- Start date
Mine are still in the box in the house, its too damn cold outside to install them!
https://www.airliftcompany.com/products/air-springs/loadlifter-5000-ultimate/
greenlightning86
Active member
I have firestone airbags on my 2013 GMC 1/2 and they recommend a minimum of 5psi so I keep mine in the 5 to 8 range when empty. The truck is definitely rougher with no load in box but after awhile that just becomes the normal and you don't think about it...until you are in a parking lot full of speed bumps.
the_real_wild1
Active VIP Member
Personally I wouldn't run anything in them empty but that is just my opinion
- Thread starter
- #24
Cat401
Active VIP Member
did you ever try with less pressure to see if that choppiness goes away?
greenlightning86
Active member
No I am scared to run them empty just in case somethings comes up when I have to put something in the box and I don't want to get the compressor to add air. I just feel better having some air in them because it doesn't take much weight to make the back end squat down on a half ton.
Bnorth
Active VIP Member
~$450 + install which should be about 2 hours.
Xfmontana
Active VIP Member
I payed 400 without compressor, took me 4hrs to install. Have had them for 5 years, work awesome
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Vance Matheson
Active VIP Member
650$ installed for a set of firestone ride rite for a 3/4 ton at trucks plus. Free tire rotation at the same time.
Should be a little less for a 1/2 ton.
Sent from my LG-H812 using Tapatalk
the_real_wild1
Active VIP Member
Why do you need to run bags on your truck?
- Admin
- #31
Not a need it's a preference
the_real_wild1
Active VIP Member
ok then.
sirkdev
Active VIP Member
So a couple of random thoughts for my airbag experiences in the past.... I am a big believer air bag size is huge for ride quality the bigger the better. Look at highway tractors, large volume low pressure equals the same amount of lift with small volume high pressure. So this poses an issue for most off the shelf kits, as space gets tighter in new trucks bags get smaller. They do the job to take the load but ride quality suffers. Someday.. I am going to remove at least half my leaf pack and rig up a couple of big bags. Can you say cadillac smooth at 20 psi.
Another suggestion to look at when choosing a kit, (I have had pac brake, firestone and air lift setups) look for steel or metal fittings on bags. My airlift bags plastic fittings broke off when I was on gravel hauling a load. PITA. Firestone and pac brake kits had steel or variation there of fittings and never had an issue. Most kits will come with plastic tubing, consider replacing that with hydraulic hose if you do significant off road driving, if not shield it or wrap it etc, you get the idea.
Any who bigger is better when it comes to bag size!
Another suggestion to look at when choosing a kit, (I have had pac brake, firestone and air lift setups) look for steel or metal fittings on bags. My airlift bags plastic fittings broke off when I was on gravel hauling a load. PITA. Firestone and pac brake kits had steel or variation there of fittings and never had an issue. Most kits will come with plastic tubing, consider replacing that with hydraulic hose if you do significant off road driving, if not shield it or wrap it etc, you get the idea.
Any who bigger is better when it comes to bag size!
ferniesnow
I'm doo-ing it!
- Joined
- Dec 2, 2008
- Messages
- 112,077
- Reaction score
- 86,103
- Location
- beautiful, downtown Salmon Arm, BC
that's what she says.
Was this a half ton? Hard to tell.
Close call caught on dashcam as giant bale falls off truck near Saskatoon - Saskatchewan - CBC News
Close call caught on dashcam as giant bale falls off truck near Saskatoon - Saskatchewan - CBC News
It was 2500 or 3500 chev by the look of video
LBZ
Active VIP Member
X2. Ran around for months at 0psi many times. 10 years on them and still held air when I sold the truck. They were Firestone bags.
Looking at another set for my new truck right now. $450 shipped for a ride right kit for 2500hd. Easy to install.
Last edited:
chickenman
Active VIP Member
I'm looking at adding an onboard compressor unit to my '15 F-150 with firestone bags. Nothing fanc, just like the idea of the convenience. What are guys thoughts/recomendations on what to look at and what to stay away from?
something like this https://www.summitracing.com/int/parts/air-25804/overview/?retaillocation=int
something like this https://www.summitracing.com/int/parts/air-25804/overview/?retaillocation=int
towerrigger
Active VIP Member
I installed a on board compressor into my 1500 for my airbags. Honestly I won't run bags again with out the compressor and gauge. I hid the switch and gauge under the center console so it is out of the way. You can easily check the pressure and adjust if needed. It was always a pain in the ass in the winter filling the bags manually when needed.
