sticker gunk removal

[rotormech]

what does everyone use to remove sticker gunk off the plastic side panells?

 

[rzrgade]

Goo gone...........homehardware

 

[rotormech]

will try, thanks

 

[OVERKILL 19]

Best chit ever!! Period! IMO

 

[rzrgade]

WEt it ,let it sit ,use your fingers.... If it`s really tough a LITTLE help with a hairdryer...

 

[JoHNI_T]

what does everyone use to remove sticker gunk off the plastic side panells?

best way is to heat decal and pull slowly and there should be no residue,,, unless the panel is 5 years old maybe tuffer to get off,,

just be careful some adhesive removers will make a black panel fade or go dull a bit.

 

[rotormech]

I just took off all the decals on my 2011 xp.the side pannels are the rough finish.you can see where the decal was.need to get that stuff off

 

[TROLLCAT]

a can of either , spray and wipe repeat
oh yeah don't blow your self up

 

[kbrunlees]

Tried a tiger torch once, that didn't work so well. Not recommended!

 

[gotboost]

WD 40 works good

 

[sweld]

Brake clean

 

[ferniesnow]

gas or diesel fuel and it won't harm the panel.

 

[eclipse1966]

WD 40 works good

.....x2

Just used that to remove stickers on my boat and worked great

 

[ferniesnow]

.....x2

Just used that to remove stickers on my boat and worked great

he wants to know about stickers on a doo not a boat.......come on eh!

 

[KVF 700]

Brake clean

x2 works good

 

[Summiteer]

I found that gas line antifreeze works well....or isopropyl alcohol

 

[zeebs]

I use goo gone for the little bit left. However if you experiment with it a hairdryer works almost flawless. Heat the sticker up to start then slowly start peeling off you might have to play with the heat a little because hotter ISNT always better. Good luck

 

[rzrgade]

X2 Hairdryer & goo gone..............

 

[rmk 800 144]

Wd-40 and a knife