Stalls when hot!?!?

dodgeguy

Active VIP Member
Joined
Feb 23, 2011
Messages
521
Reaction score
327
Location
C. Alberta
Do i have a carb issue? Quad ran great up untill it sat for three months and all the gas evaporated out...and i mean all. Now it will start normally, run for 5-10 minutes and stall, can keep it running with small blips on the throttle for maybe another 5 minutes then itstalls and won't start til its cooled a bit.

Brand new spark plug (with good strong sark) tank is full to the top with fresh gas, dielectric greased plug....still doing it!!


Carb issues?? '99 AC500 with Mikuni carb
 

medler

I love guns
Joined
Aug 6, 2007
Messages
17,667
Reaction score
8,146
Location
Stettler Alberta
Any black smoke coming out...?Starving for air maybe. Maybe a mouse nest or something stupid in the air box.?Seems strange for sure.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,557
Reaction score
16,989
Location
DA Moose B.C
Unless u use sea foam or some kind of stabilizer gas goes bad in 2-3 months now.

Take Ur carb apart. Bet its green in the bowl.

sent from A UNKNOWN PLACE IN TEA LAND
 

dodgeguy

Active VIP Member
Joined
Feb 23, 2011
Messages
521
Reaction score
327
Location
C. Alberta
I use a stabilizer..I took the airbox apart, no nests...

Yesterday I took it for a slow ride around my parents acreage, and ventured out around the subdivision slowly even got it up to 3rd gear...ran great good throttle response, hit the throttle hard up there driveway (kinda steep) in third gear and it accelerated nicely up to the garage....but the moment I let off the throttle and started shifting down....it stalled. Got to first gear before it stalled. Played with the idle quite a bit....no difference.

It has to be a carb problem...and since I know next to nothing about carbs, who is interested in showin me. I am more than up to do the work so long as I have good guidance!
 

kbrunlees

Active VIP Member
Joined
Sep 24, 2010
Messages
1,704
Reaction score
1,364
Location
Edmonton
You might need to get a kit Rob, as some carbs rip their gaskets when you take them apart. I suspect that your low idle screw is plugged with varnish and it needs to be cleaned out plain and simple. The kits usually have a guide that comes with them.
 

Trashy

Super Moderator
Moderator
Joined
Nov 16, 2008
Messages
132,643
Reaction score
104,969
Location
Fort Macleod
I use a stabilizer..I took the airbox apart, no nests...

Yesterday I took it for a slow ride around my parents acreage, and ventured out around the subdivision slowly even got it up to 3rd gear...ran great good throttle response, hit the throttle hard up there driveway (kinda steep) in third gear and it accelerated nicely up to the garage....but the moment I let off the throttle and started shifting down....it stalled. Got to first gear before it stalled. Played with the idle quite a bit....no difference.

It has to be a carb problem...and since I know next to nothing about carbs, who is interested in showin me. I am more than up to do the work so long as I have good guidance!
Where is "C. Alberta"?
 

dodgeguy

Active VIP Member
Joined
Feb 23, 2011
Messages
521
Reaction score
327
Location
C. Alberta
You might need to get a kit Rob, as some carbs rip their gaskets when you take them apart. I suspect that your low idle screw is plugged with varnish and it needs to be cleaned out plain and simple. The kits usually have a guide that comes with them.

Thanks Kelly, I'll look into that!
 

dodgeguy

Active VIP Member
Joined
Feb 23, 2011
Messages
521
Reaction score
327
Location
C. Alberta
Well the latest...I put a full tank of fuel in the quad 2 weeks ago, put a shot of Lucas fuel treatment in (was out of my Amsoil stuff) and now the old beast will idle for 40 minutes no issues.


Just wondering if these old machines are sensitive to flat batteries like the new ones? As this battery is not holding charge very well!
 
Top Bottom