Slow down my sled!

rlook

Active member
Joined
Apr 4, 2009
Messages
45
Reaction score
17
Location
North of 60
I have a 2019 Backcountry 600. This may seem strange but I want to slow it down, or decrease the minimum speed. Reason for this is for riding with my kids and really tight bush riding. If I recall correctly from last season it runs around 30-40 km/h at a minimum. To slow this down should I gear it down or change clutching engagement or something else? I'm inclined towards the gearing reduction as I have seen it work on a 2011 Renegade, but I dont know for sure that this is the best option. Had anyone done this before and could offer some advice?
 

drew562

Active VIP Member
Joined
Mar 13, 2008
Messages
5,462
Reaction score
21,393
Location
edmonton
I have a 2019 Backcountry 600. This may seem strange but I want to slow it down, or decrease the minimum speed. Reason for this is for riding with my kids and really tight bush riding. If I recall correctly from last season it runs around 30-40 km/h at a minimum. To slow this down should I gear it down or change clutching engagement or something else? I'm inclined towards the gearing reduction as I have seen it work on a 2011 Renegade, but I dont know for sure that this is the best option. Had anyone done this before and could offer some advice?
I generally control trail speed with my thumb. �� One of my rides is a z1turbo. 130 mph sled but can still run at kids speed.
 

GreyGhost

Active VIP Member
Joined
Jan 15, 2020
Messages
347
Reaction score
417
Location
Swift Current
I have a 2019 Backcountry 600. This may seem strange but I want to slow it down, or decrease the minimum speed. Reason for this is for riding with my kids and really tight bush riding. If I recall correctly from last season it runs around 30-40 km/h at a minimum. To slow this down should I gear it down or change clutching engagement or something else? I'm inclined towards the gearing reduction as I have seen it work on a 2011 Renegade, but I dont know for sure that this is the best option. Had anyone done this before and could offer some advice?

Really easy solution just take some electrical tape and get a block of plastic and put it between the throttle. Or get some wood and just it down till it’s slow enough. Cheap and the easiest thing to do!!
 
  • Recommends
Reactions: RXN

Bogger

Bogger of the GBCA
Joined
Feb 21, 2007
Messages
24,424
Reaction score
18,498
Location
Down by the Bay
Your minimum speed has to be lower than 30/40 km/hr..... I can ride my 800's at 5km/hr
 

rlook

Active member
Joined
Apr 4, 2009
Messages
45
Reaction score
17
Location
North of 60
I guess I should have explained this better. Without disengaging the throttle and clutch the sled runs this fast. Yes, I can blip the throttle on and off and run the sled at 5 km/h, but I dont think its ideal to run the sled like this for an extended period of time. I have had lots of sleds ranging from 250 fan cooled to 700 liquid, but this is the first sled that when keeping the throttle engaged it runs too fast.
 

Rene G

Active VIP Member
Joined
Dec 23, 2008
Messages
15,894
Reaction score
5,338
Location
Grande Prairie, AB
Might want to try a clutching change, sounds like if could be engaging at too high of RPM
 

papajake

Active VIP Member
Joined
Dec 5, 2006
Messages
2,936
Reaction score
5,877
Location
Didsbury, Alberta
I would look at your drive clutch sounds like you have a weight problem or bushing that are sticking no sled should engage at 30 klm watch your tack belt should engage between 1700-2100
 

Dazzler

Active VIP Member
Joined
Oct 22, 2009
Messages
935
Reaction score
2,104
Location
Cochrane Ab
I guess I should have explained this better. Without disengaging the throttle and clutch the sled runs this fast. Yes, I can blip the throttle on and off and run the sled at 5 km/h, but I dont think its ideal to run the sled like this for an extended period of time. I have had lots of sleds ranging from 250 fan cooled to 700 liquid, but this is the first sled that when keeping the throttle engaged it runs too fast.[/QUOTE

Sounds like you need a clutch overhaul, if the sled is new to you, maybe previous owner changed the clutch spring and weights to engage at a higher rpm?
 
Last edited:

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,760
Reaction score
20,775
Location
Salmon Arm
lower clutch engagement. I recommend working with joe at IBackshift he is very knowledgeable on the BRP clutches
 

Canuk

Active VIP Member
Joined
Nov 13, 2008
Messages
444
Reaction score
143
Location
Spruce Grove
I would think a primary spring with lower engagement, and gear it down a bit. I always do. makes a different for me when picking through the trees.
 

Legend14

Active VIP Member
Joined
May 4, 2020
Messages
1,115
Reaction score
3,625
Location
Hills
Going 5km on a sled for long periods will kill it anyway,you will overheat everything.
 

Couch

Active VIP Member
Joined
Apr 14, 2013
Messages
687
Reaction score
1,225
Location
Nl
Clutching ....had a viper xtx dx that was similar and was horrible to try to ride a slow pace ...changed out the spring and dropped engagement so it was smoother and more friendly with 80 year old passenger on 2 up...
 
Top Bottom