Sled dynos

[1100]

Doing some mods to the old t3 over the summer. Would like to throw it on a dyno and see where it makes power. Also wondering if any one knows where there is a dyno that’s fairly high elevation. Would be cool to dyno tune at 5 or 6000 feet if possible.

 

[mclean]

I think Brent Linderman down in Crowsnest Pass had one back when I had my turbo m8. I think he scaled back a lot but you might be able to try to find a number for Arctic Edge and give him a a call

 

[mur190]

54 North Powersports in Bonnyville has a dyno, been lots of 800 etecs on it. Its split seconds former dyno.
Approx 2200ft elevation.

 

[YamaDad]

Not to split hairs but Bonnyville elevation is more like 1850 ft.

 

[TylerG]

54 North Powersports in Bonnyville has a dyno, been lots of 800 etecs on it. Its split seconds former dyno.
Approx 2200ft elevation.

yeah, but then you have to see that Mark guy......

wanted to stop in there the other week when we were up that way but we got more than a little soaked on our quad ride to and from the trestle, never got a chance to.

 

[neilsleder]

Not to split hairs but Bonnyville elevation is more like 1850 ft.

You know any shops in the alpine lol.

 

[neilsleder]

Deano at mad Motorsports used to have a dyno to.

 

[Summitric]

Used to be a place just south of sherwood park... I think it was called absolute power & performance 780-460-9101? I don't know if he still does sleds, but he used to do a lot of quads

 

[mur190]

Not to split hairs but Bonnyville elevation is more like 1850 ft.

at the airport.... then you drive ever so slightly uphill 4 kms south to town....

 

[mur190]

I hear ya! only way I go to that trestle is on the river! lol

yeah, but then you have to see that Mark guy......

wanted to stop in there the other week when we were up that way but we got more than a little soaked on our quad ride to and from the trestle, never got a chance to.

 

[sledn]

Al at the Sled Shed in Revy, used to take his Dyno up the mountain to test his cans. Not sure if he does that any more.

 

[NoBrakes!]

Im no engine builder but the Density Altitude (DA) at the time of dyno has more affect than the actual elevation. I have seen the Edmonton DA as low as 600' and as high as 6000'