Skinz dan adams nxt lvl front bumper

2Quickrides

Active VIP Member
Joined
Nov 12, 2012
Messages
295
Reaction score
322
Location
Sherwood Forest
Damn those look sweet! Good to know the snow catcher can be left off though, might need to get one of these if....er.....when I wreck my Polaris one.
 

Froglegs

Active member
Joined
Apr 25, 2011
Messages
69
Reaction score
45
Location
Alaska
Does it make a difference when you run the skid plate does it require any modifications. looks good
 

AK FULL THROTTLE

Active member
Joined
Nov 30, 2010
Messages
57
Reaction score
56
Location
Alaska
Not that I see... Used two 1/4-20 Carriage bolts at the bottom instead of the four rivets included. Fits perfect as I see it with no mods..

For the Polaris skidplate that is..
 

bigtvents

Member
Joined
Nov 7, 2008
Messages
8
Reaction score
4
Location
Armstrong, B.C.
Do you have a picture where/how it's mounted under the hood ? I had one of the original Skinz bumpers with a single mounting point and wanted to see how this new design is better. Thank you.
 

AK FULL THROTTLE

Active member
Joined
Nov 30, 2010
Messages
57
Reaction score
56
Location
Alaska
Do you have a picture where/how it's mounted under the hood ? I had one of the original Skinz bumpers with a single mounting point and wanted to see how this new design is better. Thank you.

I will get some.. It mounts at the shock towers like normal, down below those two are another two and also the front center and at the bottom.
 

E-Zmoke

Active VIP Member
Joined
Oct 12, 2008
Messages
1,515
Reaction score
2,751
Location
BC
I'm running one also. I have mine mounted over top of my skid plate. Just had to use longer rivets. Looks and works good!
 

E-Zmoke

Active VIP Member
Joined
Oct 12, 2008
Messages
1,515
Reaction score
2,751
Location
BC
vy2uheba.jpg


2etujyty.jpg


e2a9u6u4.jpg
 

E-Zmoke

Active VIP Member
Joined
Oct 12, 2008
Messages
1,515
Reaction score
2,751
Location
BC
It wasn't cheap that's for sure! I ordered mine from sled solutions as the bumper was only available at the time from certain distributors
 
Top Bottom