Should I buy an 08 Summit Rev XP? What to look for?

rlook

Active member
Joined
Apr 4, 2009
Messages
45
Reaction score
17
Location
North of 60
I'm looking at buying a "new" sled as per the title. It's got 1600 km and a rebuilt engine. They are asking $4600.

Is the price good or bad? Should I go for this sled or try to get something better for more cash? What should I look for when viewing the sled?

Thanks in advance
 

pfi572

Active VIP Member
Joined
Mar 10, 2010
Messages
6,064
Reaction score
15,264
Location
Grande Prairie
I would move up a few years to the etec xm . IMO
For a couple G more you could move up to a 2014/15 if you shop around .
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,732
Reaction score
20,676
Location
Salmon Arm
I agree if you're convinced on doo $6k will get an ok XM. If you're stuck at $4k get a 2010/2011 cat m8.
 

altaredneck

Active VIP Member
Joined
Sep 30, 2009
Messages
217
Reaction score
119
Location
Cochrane Ab.
Had an 08 summit and found it hard to handle and throw around. Went to a 2010 cat and was easier to toss around then got a 2013 summit with a 154 and wholly cow what a difference in handling a lot more fun to ride. I am not a super experienced rider and found t motion awesome but if budget is there I think u would have more fun on the cat. I did. Just my opinion
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,298
Reaction score
12,675
Location
Edmonton
08 has the 38" front end, no t motion in the skid and possibly the 2.25" cheese grater track. a lot was improved in the XP to 2012 and the XM stuff basically all bolts on as well.
 

Ballzdeep

Active VIP Member
Joined
Oct 12, 2017
Messages
1,967
Reaction score
6,860
Location
St Albert
just sold my 08 XP163" with T motion, pipe, can, reeds, CFR bar set up, Mod rods full vent kit, Boss Seat, headlight delete, Dynamo Joe clutch kit with some extra goodies ect ect for $3500 had 2100 miles....shop around 4600 is way to high for a 08 unless it has a hair dryer on it:beer:
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
I would also look for a xm. But that being said I loved my 09 summit hill climb edition. I put work into it to make it go but that was the funnest sled I owned
 

johnny cash

Active member
Joined
Mar 22, 2010
Messages
67
Reaction score
50
Location
Memphis, Tn.
I'm looking at buying a "new" sled as per the title. It's got 1600 km and a rebuilt engine. They are asking $4600.

Is the price good or bad? Should I go for this sled or try to get something better for more cash? What should I look for when viewing the sled?

Thanks in advance


Thata a $2,500.00 sled no more
 

NoBrakes!

Active VIP Member
Joined
Nov 13, 2011
Messages
6,298
Reaction score
12,675
Location
Edmonton
the '08 is supposed to be super light though compared to later years. It was my first real mountain sled, ill never forget the first time I got off it and onto an XM... etec baby!
 

brian h

Active VIP Member
Joined
Jul 21, 2009
Messages
848
Reaction score
1,497
Location
edmonton alberta
who rebuilt the engine? id do a compression test, look at bulkhead and tunnel for straigtness, look at track for tears or damaged lugs, etc. on a older year sled usually looking for damage but this unit for its year is very low mileage. even though low mileage its like anything its how its been treated or maintained. for the year the price seems high imo
 

jpmez69

Active VIP Member
Joined
Dec 9, 2010
Messages
781
Reaction score
1,574
Location
Edmonton
I'm looking at buying a "new" sled as per the title. It's got 1600 km and a rebuilt engine. They are asking $4600.

Is the price good or bad? Should I go for this sled or try to get something better for more cash? What should I look for when viewing the sled?

Thanks in advance

I sold my 2010 XP 154" in mint condition with 5400 kms back in 2015 for $4600.00 Including S-36 front end and T motion. Save your money and pick yourself up a clean XM. You won't regret it.
 

rlook

Active member
Joined
Apr 4, 2009
Messages
45
Reaction score
17
Location
North of 60
Ok, it's a very easy decision to pass on this one after reading all the replies!
For the guys that offered sleds for sale my only criteria for the sled is a max 146", preferably 137", I'm in Yellowknife and although there are lots of guys with 154 and 163 sleds here I think it takes away from the fun factor when you get so long. Our snow is nothing like the mountains.
Thanks for the help!
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,546
Reaction score
16,964
Location
DA Moose B.C
the '08 is supposed to be super light though compared to later years. It was my first real mountain sled, ill never forget the first time I got off it and onto an XM... etec baby!
It was too light, sh! T broke so they started to add some weight back in to put strength back
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,546
Reaction score
16,964
Location
DA Moose B.C
I just sold my 2010 xpx 163 with lots of upgrades for 3400 ish

Even if it had brand new engine, it's 1500 buck high
 

King

Active member
Joined
Nov 10, 2008
Messages
75
Reaction score
16
Location
Edmonton, Alta.
Ok, it's a very easy decision to pass on this one after reading all the replies!
For the guys that offered sleds for sale my only criteria for the sled is a max 146", preferably 137", I'm in Yellowknife and although there are lots of guys with 154 and 163 sleds here I think it takes away from the fun factor when you get so long. Our snow is nothing like the mountains.
Thanks for the help!
I have a 163 09 Summit X, I put t S-36 front end on it, T-motion, flex track, just put brand new motor in it, cleaned/rebuilt clutches etc, etc. I also have an 800 XM 163, and I know that I will get butchered for this, but I love riding the XP over the XM. So I wouldn't worry about everybody saying "Get an XM for this or that." If you like the XP then find a good one, there are still lots out there, and go for it. As for the 163 being too long, I had 151 and 154 tracks for years and did not notice a difference in handling with the 163 and it gives you that extra track on the days you need it. JMO
 

neilsleder

Active VIP Member
Joined
Oct 18, 2009
Messages
9,618
Reaction score
17,005
Location
Leduc Alberta
I have a 163 09 Summit X, I put t S-36 front end on it, T-motion, flex track, just put brand new motor in it, cleaned/rebuilt clutches etc, etc. I also have an 800 XM 163, and I know that I will get butchered for this, but I love riding the XP over the XM. So I wouldn't worry about everybody saying "Get an XM for this or that." If you like the XP then find a good one, there are still lots out there, and go for it. As for the 163 being too long, I had 151 and 154 tracks for years and did not notice a difference in handling with the 163 and it gives you that extra track on the days you need it. JMO

I preferred my xp over my xm
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,546
Reaction score
16,964
Location
DA Moose B.C
I have a 163 09 Summit X, I put t S-36 front end on it, T-motion, flex track, just put brand new motor in it, cleaned/rebuilt clutches etc, etc. I also have an 800 XM 163, and I know that I will get butchered for this, but I love riding the XP over the XM. So I wouldn't worry about everybody saying "Get an XM for this or that." If you like the XP then find a good one, there are still lots out there, and go for it. As for the 163 being too long, I had 151 and 154 tracks for years and did not notice a difference in handling with the 163 and it gives you that extra track on the days you need it. JMO
I preferred my xp over my xm
You guys is crazy



What was better??


I like my 07 Rev 800r better than my 10 xpx buffalo, it had more power and I had 12000 km of dial in time lol

After a lot of work too a lot to get the Xp even close, but it was a great machine as far as reliability


But my xm blows the side panels off both of them in every aspect....
 

bobsledder

Active VIP Member
Joined
Jan 11, 2009
Messages
2,826
Reaction score
6,120
Location
Not Sure
You guys is crazy



What was better??


I like my 07 Rev 800r better than my 10 xpx buffalo, it had more power and I had 12000 km of dial in time lol

After a lot of work too a lot to get the Xp even close, but it was a great machine as far as reliability


But my xm blows the side panels off both of them in every aspect....

Just sold an 06 rev for 2300. Tired of it being in the way. You are right these guys are crazy. Why would anyone want a carbed engine? plus all the chassis improvements the xm has over the Xp
 
Top Bottom