Shop door price?

[Indy245]

I need a 12 wide by 14 high door installed. Wondering if anyone wants to share how much theirs cost and where you got it? Doing a reality check on our local installer and want to ensure that I'm not getting ripped off. BTW, they want 4K for that door with a row of windows, electric opener and R16.

 

[ferniesnow]

9x9 insulated, in the box was $1000 for my house; No installation, no opener and that was 10 years ago. Doesn't seem unreasonable......

 

[KevinA]

a steel craft 10 x 16 factory coloured r12 or 16... not %100 sure c/w row of windows... door delivered from edmonton to white court around $1500 plus opener $300 to $500 depending on belt or chain drive or If you go to a commercial size opener... your looking at a big door. install probably around $500 to $700 depending on if they install bumpers at end of track. possibly at $2700 so far.

are they supplying door? chances are they put 25 to 30 points on top... around $400. at 14' tall that 2 extra panels over the 10' tall I ordered lets say $250 per panel so $500. were at $3600 now. not trying to say go for the 4k... just a break down. I project manage for a homebuilder and see these numbers quite often. maybe it helps ya out.

 

[SKDeuce]

Not sure if this helps or not because the doors aren't that similar to what you want but I just had a shop built with a 12 wide x 10 high, and a 10 wide x 8 high r12 doors with no windows. the big door was $1250, the smaller one was $875. Install for both was $475 with no openers.

 

[Indy245]

Thanks for the replies, looks like their pricing is competitive. Huge price difference between smaller doors and this one, the heavier running gear alone is pricey.

 

[X-it]

Roll Up Doors Direct - Roll Up Door Model 2000 order number order-config configuration

 

[Braddock54]

6x6'8" roll up door for a shed was $685 last week at HH. Not sure if that helps as this is pretty small.

 

[evan3000]

In the oh door world they put that size in the "commercial" door category and everybody charges more when you tag it " "commercial". mine was 18w 11.5 h r16 with a side mount opener, the local guys wanted nearly 1k for the install alone!
me and a buddy who has done a few did it in 4 hrs.

 

[Heimie]

I bought 2 doors for my shop. Steelcraft R16, 12W x 14H, with pusher springs, chain operators, and all hardware and weather stripping. Barcol in Edmonton wanted about $2200 each and most guys were around the same price. No windows, though. I did the install myself. Most guys that I called wanted about that price around Edmonton and wanted between $400-600 install per door.

 

[Indy245]

I bought 2 doors for my shop. Steelcraft R16, 12W x 14H, with pusher springs, chain operators, and all hardware and weather stripping. Barcol in Edmonton wanted about $2200 each and most guys were around the same price. No windows, though. I did the install myself. Most guys that I called wanted about that price around Edmonton and wanted between $400-600 install per door.

Now that is what I was looking for! The store I'm dealing with already ordered my door so I'm committed now.

In all fairness by the time I drive ten hours (return) to get a door from Edmonton to my house (~$250 Gas), set it up (~4 hrs time, probably closer to 8 with teas and swearing), custom colour (not sure if this was an adder), add windows ($350) and add an electric opener ($350) I feel that $3874 w/gst is competitive for GP.