S-36 spindles

[mur190]

Anyone has a set of non ras2 spindles they are willing to part with?
either a set or just a RH one will do, not fussy on colour as long it's not pink.

 

[Jake jenkins]

I got a set from a 2009 xp


Sent from my iPhone using Tapatalk

 

[mur190]

From everything I read they xp spindles sit about 5mm back from the xm spindles
thanks though!
Shoulda been more specific. Looking for a set of spindles from a s-36 kit or off a 13,14,15,16 non ras2 xm.

 

[tex78]

Add 11 and 12 xp in there, it's the S36 front end set up and are all the same

 

[pfi572]

Add 11 and 12 xp in there, it's the S36 front end set up and are all the same

Spindles changed in 2013 and up. I have a 2012 that spindles were bent and switched to the 2013 xm ones .

 

[pfi572]

Spindles changed in 2013 and up. I have a 2012 that spindles were bent and switched to the 2013 xm ones .

OP ?

I may part out the sled and if I do I will sell the spindles.

 

[tex78]

Spindles changed in 2013 and up. I have a 2012 that spindles were bent and switched to the 2013 xm ones .

Huh, I thought all S36 where the same till the ras2

 

[Jake jenkins]

Huh, I thought all S36 where the same till the ras2

That's what I thought also

 

[mur190]

That's what I thought also

where used on the parts fiche shows 13,14,15
Ski-Doo 505073239 - Black RH Ski Leg : Ronnie's Mail Order

 

[bobsledder]

Huh, I thought all S36 where the same till the ras2

11 and 12 have S36 a arms and shocks but use same spindle as o8 and 09. I put S36 kit on an 09. It reused existing spindles.

 

[tex78]

11 and 12 have S36 a arms and shocks but use same spindle as o8 and 09. I put S36 kit on an 09. It reused existing spindles.

08-09 I know are the same, but did they not in 10 change the spindle where the tie rods mount to ease steering effort and angles

Then 11 come out with the S36 which is possible the same spindle as the 10

 

[pfi572]

The difference between the two is the ski bolt location.
Pre 2013 the bolt was inline with the ball joints.
Xm , the location was moved ahead .

 

[tex78]

The difference between the two is the ski bolt location.
Pre 2013 the bolt was inline with the ball joints.
Xm , the location was moved ahead .

But so was the tie rod locations from 09 to 10, we're they not

 

[pfi572]

But so was the tie rod locations from 09 to 10, we're they not

The steering post was different but don't think the spindle was .

 

[mur190]

Got a set set of spindles and left side arms off a 2015 xm sp, thanks folks!

 

[tex78]

The steering post was different but don't think the spindle was .

Huh


If I recall there was a aftermarket company that made the relocation blocks to make the 09- older the same as newer

And Teth-Air if I recall was a dealer