running board traction

[note]

I have a 98 rmk and I get NO traction on the running boards. I was thinking of making or buying somthing. WHAT DO I DO?

 

[KVF 700]

heres a link to something you might be looking for in the royal distributing catologue.

 

[note]

heres a link to something you might be looking for in the royal distributing catologue.

thanks but I made some pics soon

 

[Jenkie]

I have a 98 rmk and I get NO traction on the running boards. I was thinking of making or buying somthing. WHAT DO I DO?

Snow eliminators or Better Boards - wil increase traction and redue snow build up on the boards

 

[sledneck48]

If ur on a budget rivets from the bottom work pretty well

 

[note]

what do you think of these home made strips? im 14, it took 30 min, and $15.

 

[sledneck48]

looks like it would add some good traction steels pretty heavy though. Could cut some "teeth" into each piece

 

[sledneck48]

And you can buy tubes with traction that go over the tubes on the edge of the running board. Makes a big difference

 

[Junior Highmark]

What sled neck said! =P

Cutting teeth into them might be a good idea.

 

[note]

looks like it would add some good traction steels pretty heavy though. Could cut some "teeth" into each piece

its aluninum, also im might cut teeth maybey.

 

[Black Cheep]

I guess it depends on how quickly you need them. I am a few weeks away from my grand opening sale, and I will have a set of boards for your sled for about $150 Canadian. My boards also tie into the front 5 rivets which is a weak spot on your tunnel. Of course they are powder coated in either black or red, and have all the colored rivets and directions. Would be similar to the better board, just made north of the board (notice the little joke).

Randy

 

[99summitx]

I guess it depends on how quickly you need them. I am a few weeks away from my grand opening sale, and I will have a set of boards for your sled for about $150 Canadian. My boards also tie into the front 5 rivets which is a weak spot on your tunnel. Of course they are powder coated in either black or red, and have all the colored rivets and directions. Would be similar to the better board, just made north of the board (notice the little joke).

Randy

Doing any up for the s-chassis skidoo?

 

[dirtbag]

here's some old indy running boards I did with a punch flare tool

 

[kimrick]

The simplest and easiest is sometimes right in front of you.

Phone Marathon decks and buy two strips of superglides for $10 bucks each.

Trim to fit board and rivet or bold on.

Voila!

Under thirty bucks total and you will have superior grip with light weight results.

Cheap but they work.

 

[magnet]

here are some we did for my sons ride. was easy and cheap but you gotta have the bender to make it nice.

 

[note]

here are some we did for my sons ride. was easy and cheap but you gotta have the bender to make it nice.

looks good! id show you some pics of what I ended up doing but I sold my rmk for a DOO :d

 

[AkNomad]

Get you a set of Feet Hookers and be done with it! Meathooker's Feethookers