Rev Spring compressor

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
Does anyone know the ID of a skidoo TRA spring compressor, I know the coller/pipe is 5/8 id but I need the loop ID. Reason would like to build before taking clutch apart.I think it should be around 3 1/2 inchs
 

renegade x

Active VIP Member
Joined
Dec 18, 2006
Messages
628
Reaction score
134
Location
leduc ab
different springs are different lengths.I use a piece of 5/8 all thread 14 inches long welded a nut to one end and a washer on each end works great.
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
different springs are different lengths.I use a piece of 5/8 all thread 14 inches long welded a nut to one end and a washer on each end works great.

Thanks, I got that part built, I'm refering the u- shaped part which is riding up and down on the 5/8 rod to get the half moon c-clips out. Or is your washer small enough that you can get the c-clips out? Sorry for the dumb ?'s Ive never had one apart.
 
Top Bottom