rer quit working

[rtk]

After the ride back to the truck from Renshaw my rer would not work engine shut off, but did not restart. After getting home and the sled sat inside everthing seems fine anyone else ever have this happen. I thinks maybe some moisture in a connection and it froze on the trail.Sled is an 06 Summit and the computer has been moved to above the oil reivoir.

 

[tex78]

Did u try it again. After. Cause if it keeps failing. It's low on compresion on one hole

Sent from my HTC-Z710a using Tapatalk

 

[PowMower]

On my old '03 800 rev the rer quit working when the top end was shot.

 

[slededjr]

usually due to low compression. better check it.

 

[rtk]

forgot to mention thied ride on complete rebuilt engine

 

[TylerG]

forgot to mention thied ride on complete rebuilt engine

I think I'd still be checking it, and di-electric greasing my connectors.

 

[POWDERCHOWDER]

mine was always on and off sometimes worked sometimes not. i found giving it a burp just before the rotation
change worked well for me.

 

[rtk]

compression is good

 

[teeroy]

belt deflection is another common culprit. too tight and it won't reverse

 

[rtk]

I have looked on this forum and checked almost everything that has been mentioned. It is funny that i used it in the afternoon after being stuck and it worked fine. I had to roll the sled over on a hill and after riding down to the truck it shut the engine off, but not restart in reverse now that it is warmed up and dry it works.

 

[tex78]

Was the idle either low or high. Needs a stabile idle to work. That's y the low hole messes up the rer.

Sent from my HTC-Z710a using Tapatalk