rebuilding drive clutch

[guido88gt]

is there anywhere to buy a rebuild kit for cats? u can only buy the spring and rams(cams) from acrtic cat... want to replace the rollers as well.. anyone know?

 

[TylerG]

What year cat?

 

[guido88gt]

2007 m6

 

[Graveler]

in most cases by the time you buy the parts and have it balanced your a 100 shy of a New one or less

 

[moyiesledhead]

Nope! One of my pet peeves with Cat!

 

[Ruegsegger]

I just bought a brand new clutch off ebay from Country Cat in Minnesota. It came with everything except the flywheel, spring and weights. $375 Canadian shipped to my door in fort mac.

 

[ranger620]

I have changed my rollers pins bearings and buttons in my primary on my 09 m8 by using 99 powder special 700 parts.

 

[guido88gt]

I just bought a brand new clutch off ebay from Country Cat in Minnesota. It came with everything except the flywheel, spring and weights. $375 Canadian shipped to my door in fort mac.

What kind of sled? I got a 2007 m6 with a 8.25" 33mm clutch.. Having a hard time finding one. Does it matter if the part number is different. They got the same clutch on the eBay store but it's a different part number..

 

[calgarysledguy]

What kind of sled? I got a 2007 m6 with a 8.25" 33mm clutch.. Having a hard time finding one. Does it matter if the part number is different. They got the same clutch on the eBay store but it's a different part number..

Nope dont matter if part number is differnt.Lots of numbers were replaced with this number that number..........make sure its the same 8.25 33mm.You can double check to make sure that part number runs the same belt as yours to ensure its shimmed right for your sled. 0627 046 belt right.I went through this with my m7.

so your clutch is screwed?

 

[guido88gt]

Looks like it. About 1/4" play on the center shaft... I'm not a pro with clutch though...

 

[Turbo-North]

I use this site to check fit and numbers Alpha Sports - Arctic Cat Snowmobile Catalog . Only way to rebuild them is buy a Spider or find a left over roller kit like ranger did. Course you need special tools and heat to get the spider off.

 

[moyiesledhead]

Course you need special tools and heat to get the spider off.

And they usually crack or gaull the threads anyway.

 

[guido88gt]

Ordered a new one today from country cat .. 366 bucks to Calgary.