Rear Skid Sag!!!

[Ballplayer19]

Just put new fox evol burandt edition shocks in my rear end and also have them on front with the new skinz front end on my 2014 Boost-It Turbo 163". I watched the skinz series on how too setup properly with all the specified air pressures. Still end up having around 3-4" of sag in the rear end after all my modifications are done. Can't seem too get less sag. Anyone else have this problem after putting the fox shocks in???
Air Pressures are as follows:

Front Skis- 80 PSI Main Chamber
160 PSI EVOL Chamber
Rear Skid: Center- 60 PSI
Back- 120 PSI Main Chamber
180 PSI EVOL Chamber



Sent from my iPhone

 

[Jordan1924]

Is it on any dollies... under skis or the track.. will do funny things if there is

 

[Ballplayer19]

Nope flat on the ground


Sent from my iPhone

 

[butthead1]

i went from springy thing on the rear from 3 to 4 that gave me just under 3 in sag
give it a try

 

[HotShotHarry]

I had the same issue. The fox manual says not to exceed 150 lbs in the main chamber. I had to put 200 in the main and I run 200 in the Evol to get the sag correct. Ran the last 2 seasons like that with no issues.