rapid bike efi box (powderlite)

[Apex06]

Anyone use them yet?
Anyone know if they are compatible with MCX kits??

 

[Powderlites]

Yes we have them for Apex's with MCx kits already.
With sharing of maps coming soon it will be the trick EFI system to have.
Raise the RPM limiter
Add timing for throttle response and pull away with boost
Bigger injectors kits are coming soon.
Stutter button for drag racing
No adjusting once setup! just ride anywhere high or low and at any boost level.

 

[Sammy]

What mapping have you got set up for the mcx. Currently running 12psi but will be going to 17-18 psi. What about pricing as well.
Thanks in advance.

 

[Apex06]

How about for a Phazer with MCX?
Let me know the pricing aswell i need one shortly!

Yes we have them for Apex's with MCx kits already.
With sharing of maps coming soon it will be the trick EFI system to have.
Raise the RPM limiter
Add timing for throttle response and pull away with boost
Bigger injectors kits are coming soon.
Stutter button for drag racing
No adjusting once setup! just ride anywhere high or low and at any boost level.

 

[Washy]

Do you have the mapping for a MCX Nytro yet Dave. Contacted you earlier in the season but you did not have it yet. Looking to be able to run up to 17psi with the RB3.
Let me know what I need. I already have a electric fuel pump and the stock fuel pump removed.

Thanks

 

[IMSICK]

I run it on my synergy... but I doubt that the mapping would work on the MCX, might be a good starting map tho

 

[summitbound]

Get a hold of Ron or Jeff at
Quantum Velocity Performance Inc. Home in Red Deer
403-341-4012

 

[IMSICK]

Get a hold of Ron or Jeff at
Quantum Velocity Performance Inc. Home in Red Deer
403-341-4012

Thats who built mne too

 

[Apex06]

what controllers are you guys running??

 

[Powderlites]

RB3 maps for sleds are being done so ready for most sleds by the time snow flys.
Map for FX Nytro to run up to 2bar/15 lbs boost is done with stock injectors.
Need a little more time for map with bigger injectors and 3bar sensor.
Maps for Apex are being redone for better drivablity in low end but we will have some that with fine tunning are close.
Apex PowderLites stage 1 with muffler out the back in only 2" with stage 3 injectors, race gas, stock motor with cam timing and head spacer did pull pretty good power for GT2860rs turbo. 363 HP at 18 PSI boost
Fastek Performance's Darryn's own sled.
There will be more info coming soon!
Sorry if we take so long to get back to you guys but we have been busy with getting new stuff ready before snow flys.
All RB3 box can have RPM limiter set higher, Be able to run 2 maps so one for low boost pump gas and one for High boost race fuel.
All come with stutter option built right in for the serious drag guys.
Stutter is adjustible RPM hold so you can setup 2800 RPM and run low clutch engagement and smoke your buddies off the line.

 

[IMSICK]

what controllers are you guys running??

Boost control - AEM digital