Quick drive tool

[Crazy C]

Hey just wondering if anyone has a pic of the quick drive tool that you need to change the belt. I have been googling it and other tools are coming up. Just curious what it looks like so I can try and find one.

 

[ABMax24]

 

[JMCX]

Pull the centre bolt out of your secondary. There you will find a spacer. Bolt that to other side, with no washers, to use as an installation tool.

 

[Crazy C]

Ok thank you

 

[Rhodesie]

polaris posted a video on youtube a few years ago and now i can't find it. how to install a new belt without the alignment tools. used zip ties. helpful video thats probably why they took it down.

 

[armascott]

https://youtu.be/kOoPP4m3HF8

 

[armascott]

I made one of these ^^^ works great

 

[Crazy C]

Ya I have been looking for videos of tricks and all I can find is for the clutch belt

 

[Crazy C]

Nice I'll have to make one

 

[TDR]

I’ll save you a lot of time and money. Buy a zip tie and they change out real fast. Vohk has a video.

 

[mt.sledder]

The cut turnbuckle works very good. I usually remove the turnbuckle as soon as I have the pulleys started on the shafts. That way they slide in even easier than the video shows.

 

[Rhodesie]

I’ll save you a lot of time and money. Buy a zip tie and they change out real fast. Vohk has a video.

can you post the link?

 

[TDR]

I’ll see if I can find it. Basically you put a zip tie on the belt to make it the shape it is on the pulleys. Put the top gear in the belt. Put the bottom gear in the belt. Install top gear on jackshaft and turn bolt 1 thread. Have someone turn track a little and bottom gear slides on. Super easy and no tools. I’ve changed many and it works.

 

[Quicksand]

zip tie method

https://www.facebook.com/207598693180150/posts/344587919481226/

worked perfectly when i did it