plz post pick of 96-03 summits

[Modman]

YEAH ive heard that before...

thats at 10psi....think thats to much for that guy? would the 66 be better maybe...probly to big for that little motor though..

Talk to a guy called "mnflats" on dootalk, he ran 11lbs on his 53 in his 600sdi and it made it 1 ride........then the turbo blew. A rebuild is about $1000 and no go until the turbo is back in. You might get away with 10lbs, the newer 53's are designed better, but probably only good til 8lbs on an older one.

It will still be a good sled with 6-9 lbs, but trying to get too much out of that little motor will only cause more problems IMO. Not sure about the 66, you'd have to talk Aero and see what they say.

Good luck man! Hope you get it figured!!

 

[maxwell]

hmm well my numbers were based from turboboyz. they make a kit for the 600sdi that they claim 10lbs through the 53 so i figured that would be safe. o well it will be an expiriment thats forsure. i have talked to that guy actually his kit is forsale right now i was debating buying that one. but its designed for a rev chassis so i would still have to mod the exhaust and whatnot. ill ride it until it blows then maybe try a cat motor in it hahahaha

 

[sledderdoc]

Whered you get the light kit from looks sweet.

Light kit came from some ground effects place in New York. Fully encased in acrylic virtually bullet proof specially made for sleds. Expensive though, I think it was $150.00 bucks in 04.

 

[POWDERSLUT]

hmm well my numbers were based from turboboyz. they make a kit for the 600sdi that they claim 10lbs through the 53 so i figured that would be safe. o well it will be an expiriment thats forsure. i have talked to that guy actually his kit is forsale right now i was debating buying that one. but its designed for a rev chassis so i would still have to mod the exhaust and whatnot. ill ride it until it blows then maybe try a cat motor in it hahahaha

a cat motor this must be a joke

 

[clint/KTM/16]

98 summit 670x, wiesco pistons, bored out to 683. $1100 brp track.

 

[cueball115a]

Those were taken back in Fev 2002 , it a 2001 Summit 700

 

[Spector]

My slightly tweaked 00 Summit 700 in Revy 2 weeks ago. Luv this machine:d

 

[Vertical-Extreme]

here's mine FYI it will be for sale at the end of the season

 

[hogwild]

heres mine 97 x summit. just got it and am itching to ride it, 785 union bay ,crank shop twins,46 mm carbs, the works.

 

[Thunderguy BOOSTED]

This is my MOD 97 SUMMIT!! New track, skid, pistons, pipes, new p-85 primary clutch, rebuilt secondary with a $150 helix, hoods,rads, handle bar, hand warmers, and a few other small things!!

Her is how she sits !!

Oh and iam still going to paint the trailing arms BLACK!!!!:d:d

Later

TG:d

 

[hogwild]

better get at er or it wont be goin far this winter

 

[Thunderguy BOOSTED]

YA YA!! I know i have to get with it!!
Taking it in on Tuesday for a 5 minute weld job, ordering some parts from Royal Distributing today, and then when i get some free time iam going to start on the mesh hood!!:d:d

Later

TG:d