Plugging in Diesel trucks

arcticdodge

Active VIP Member
Joined
Nov 15, 2006
Messages
616
Reaction score
232
Location
Redcliff Alberta
Just wondering at what temp everybody plugs in there diesel trucks. One friend has a 05 Chev diesel uses synthetic oil and never plugs it in. Another one with a dodge ram mega cab 5.9l plugs his in at about -18. I have the same truck and plug it in at -10. Father in law has an older '92 chev 6.5 and it needs to be plugged in at basically 0. Any feedback greatly appreciated. Thanks:d
 

DRD

Active VIP Member
Joined
Oct 21, 2008
Messages
2,755
Reaction score
5,457
Location
Red Deer County
Most newer diesels will start at -30 with no problem. That being said I plug mine in if it's going to be -10 or colder, it's just so much easier on them if you do that.
 

ardypol

Active VIP Member
Joined
Oct 2, 2008
Messages
6,006
Reaction score
312
Location
Bedrock
Most newer diesels will start at -30 with no problem. That being said I plug mine in if it's going to be -10 or colder, it's just so much easier on them if you do that.

I'm with you there. That's what I do too.
 

SLEDJED

Active VIP Member
Joined
Oct 15, 2008
Messages
217
Reaction score
48
Location
fort mcmurray, alberta
I use to have a 05 Ford 6.0L and it had a hard time starting at anything colder than -15 without being plugged in. I have left my 08 Duramax that I have now at -30 and it started no problem, it wasn't happy about it but it started. I usually plug in at -15 or colder.
 

ZEDNECK

Active VIP Member
Joined
Sep 13, 2008
Messages
391
Reaction score
122
Location
Hillmond
Just wondering at what temp everybody plugs in there diesel trucks. One friend has a 05 Chev diesel uses synthetic oil and never plugs it in. Another one with a dodge ram mega cab 5.9l plugs his in at about -18. I have the same truck and plug it in at -10. Father in law has an older '92 chev 6.5 and it needs to be plugged in at basically 0. Any feedback greatly appreciated. Thanks:d

lol my old 6.5l had to be plugged in if it was like +5 and had to be started every couple days. was afraid to shut that thing off if i ever went anywhere for fear that it might not start again. around -10 is when we start plugging the 7.3l powerstroke in and if its plugged in at -50 it usually starts
 

S.W.A.T.

Active VIP Member
Joined
Apr 13, 2008
Messages
4,494
Reaction score
7,846
Location
Smithers
for me its anything around the 0 mark. just starts easier and its not as hard on the pumps and injectors. Another plus is it doesnt take as long for the cab to warm up. just depends if you like to hear your truck moan and groan as it struggles to move the oil...
 

BIGFOOT

Moderator
Moderator
Joined
Dec 11, 2006
Messages
5,528
Reaction score
1,079
Location
Hidden zone
for me its anything around the 0 mark. just starts easier and its not as hard on the pumps and injectors. Another plus is it doesnt take as long for the cab to warm up. just depends if you like to hear your truck moan and groan as it struggles to move the oil...

Same as You S.W.A.T...... Use the Alaskan pad pan heaters and when I know I am going to need the truck I plug the block heater in. -40 this winter,started with no effort at all.
 

Sleeper700

Active VIP Member
Joined
Dec 1, 2006
Messages
491
Reaction score
48
Location
Calmar, AB
Most GM Vehicles 1999+ have a thermostat in the block heater, and they don't turn on internally unless it is -18C. That way, you can plug it in at night, and it won't turn on until it dips that low. This is an easy way to prevent some of the block heater fires that can happen. Just an FYI.
 

drford

Active VIP Member
Joined
Feb 16, 2009
Messages
435
Reaction score
86
Location
Grande prairie
most vehicles with wnter oil will start fine i know a 2005 up dmax has a temp sensor built into the block heater cord it will not allow block heater to come on unless temp is below -15 or 20 somewhere in there it can be bypassd but a cel light will appear and will keep coming back without correct cord only when starteed cold good idea to prevent wasting power and encourage customer to use correct grade of oil too my 73 dont like it any colder than -20 then needs to be warmed up it does not like it but every truck is different and needs it own care i have see 7.3 ford start no issue at -30 the best stating cold diesel is a cummins though
 

gotboost

Active VIP Member
Joined
Oct 18, 2008
Messages
2,762
Reaction score
3,645
Location
Northern AB
i just use my espar heater get out in the morning 170 degree water temp nice and warm :d and warm heat to the heaters instanly
 

j335

Active VIP Member
Joined
Jan 3, 2007
Messages
1,873
Reaction score
1,821
Location
AB
Just wondering at what temp everybody plugs in there diesel trucks. One friend has a 05 Chev diesel uses synthetic oil and never plugs it in. Another one with a dodge ram mega cab 5.9l plugs his in at about -18. I have the same truck and plug it in at -10. Father in law has an older '92 chev 6.5 and it needs to be plugged in at basically 0. Any feedback greatly appreciated. Thanks:d

My dads Cummins 07 5.9L starts no problem at -30
 

Riverjet

Active VIP Member
Joined
Dec 24, 2008
Messages
1,703
Reaction score
1,388
Location
Prince George
Most GM Vehicles 1999+ have a thermostat in the block heater, and they don't turn on internally unless it is -18C. That way, you can plug it in at night, and it won't turn on until it dips that low. This is an easy way to prevent some of the block heater fires that can happen. Just an FYI.

What causes block heater fires?
 

Octane

Active VIP Member
Joined
Sep 2, 2009
Messages
175
Reaction score
10
Location
Lamont, AB
i plug my 08 F350 6.4 when its anything under -10C
its way easier on the truck
 

Oilboy

Active VIP Member
Joined
Sep 7, 2008
Messages
441
Reaction score
281
Location
Suckin OIL from the earth
ya i plug my 6.4 in at -10 ish too and i also run 0-40 syn XD3 so i know i have instant oil pressure.
and if its cold out durring the day and im comming and going from the house lots i plug it in, it keeps the coolent warm and you get heat way faster, and its not my power bill lol
 

RMK Junky

Active VIP Member
Joined
Mar 15, 2009
Messages
3,258
Reaction score
1,044
Location
Grande Prairie AB.
Website
www.snowandmud.com
Anything below -10 for sure :d It's best you treat your diesel with care because it will bite you in the ass later. Turning a crank bearing is not a good thing because of a hard cold start :( I run 15w40 Shell Rotela T in mine and only have 2085 hrs so it's alittle stiff yet.
 

S.W.A.T.

Active VIP Member
Joined
Apr 13, 2008
Messages
4,494
Reaction score
7,846
Location
Smithers
Remember just because the truck starts doesnt me its good for it. Have you ever seen what oil looks like at -30. just try and imagine trying to feed it into a motor. hard on valves and everything.
 

j335

Active VIP Member
Joined
Jan 3, 2007
Messages
1,873
Reaction score
1,821
Location
AB
Remember just because the truck starts doesnt me its good for it. Have you ever seen what oil looks like at -30. just try and imagine trying to feed it into a motor. hard on valves and everything.

Definetely not good for it, but just saying sometimes you don't have a choice. Synthetic is a must as well, the cloud/freeze points are much better than conventional.
 
Top Bottom