Plastic grease/lube?

[The big greasy]

I'd like to know what is the absolute best, slickest, doesn't dry out grease/lube for plastic? Tried white lithium grease, didn't cut it.

 

[AreWeThereYet]

For starters, what temp, under water, dirty conditions?

 

[The big greasy]

For starters, what temp, under water, dirty conditions?

+1-20, above water, clean conditions.

 

[AreWeThereYet]

If you are looking for aerosols, you can try Blaster Dry Lube with teflon, or their dry graphite spray, there is also Wd-40 Specialist. These are what I use to make things slippery after they dry

 

[X-it]

Kind of like a sticking skidoo recoil thread. Shin Etsu silicon grease... maybe.

 

[The big greasy]

If you are looking for aerosols, you can try Blaster Dry Lube with teflon, or their dry graphite spray, there is also Wd-40 Specialist. These are what I use to make things slippery after they dry

Where does one get that stuff

 

[AreWeThereYet]

Where does one get that stuff

Crappy tire

 

[The big greasy]

Crappy tire

Thanks man, will get some

 

[skegpro]

PTFE Grease
Put that **** in everything.

 

[ZRrrr]

PTFE Grease
Put that **** in everything. //uploads.tapatalk-cdn.com/20201207/eb44198855c4b65aa3ca669155b28034.jpg

As I was reading this thread that's where my thought was headed. I have a left over tube of PTFE grease that was used for the slip yoke on my old F350. That stuff works really well too.

 

[arff]

PTFE Grease
Put that **** in everything. //uploads.tapatalk-cdn.com/20201207/eb44198855c4b65aa3ca669155b28034.jpg

Deere lube must be expensive and good.

 

[rebel]

Deere lube must be expensive and good.

Only the best

 

[skegpro]

Only the best

Pretty sure it is just rebranded super lube.

Good stuff, just wish more companies made it.

https://www.super-lube.com/multi-purpose-synthetic-grease-with-syncolon-ptfe