Pipe rub

[Treecrasher]

23 Khaos pipe is rubbing on bumper, anyone had this issue

 

[d8grandpa]

Check if the rubber bushing is under it at the cross shaft, if it is and still rubbing you can add a thick washer under it and pipe will roll away from the bumper

 

[Stompin Tom]

I thought maybe I had clicked on the wrong link, but no, still Snow and Mud.

Normally when I see pipe rub my mind goes elsewhere.

 

[Treecrasher]

Check if the rubber bushing is under it at the cross shaft, if it is and still rubbing you can add a thick washer under it and pipe will roll away from the bumper

Your talking the bottom brace of the can or the upper one?

 

[d8grandpa]

You’re talking the bottom brace of the can or the upper one?

this one

 

[Treecrasher]

Ok thank you

 

[OnlyPolaris]

add a 9/16" washer before putting that rubber back under the pipe and you will be good to go.

 

[dabensmiller]

I am getting a new pipe under warranty due to rubbing. I wasn't even aware of a problem, the dealer said it was being replaced when it was in for the recalls.
I have the stock can. However, I bought it used, so an aftermarket can was likely installed at one time, they say that is part of the problem.

 

[OnlyPolaris]

I am getting a new pipe under warranty due to rubbing. I wasn't even aware of a problem, the dealer said it was being replaced when it was in for the recalls.
I have the stock can. However, I bought it used, so an aftermarket can was likely installed at one time, they say that is part of the problem.

I ran the stock can for the first 700km. My pipe rubbed from the very beginning.