Teth-Air
Active VIP Member
Well we put a Teth-Air on a new Pro and had to find the best place for the install. Not too hot, not where you would smash it, also in a place you can open a side panel and access the push button and see the LED indicator light.
Here is what we found best. All the connections where made right by the steering column in the nylon bag that protects the wiring. The white plug with brown and white wires is the AC power supply. We did not have a proper plug at this time so we used a MOLEX plug that is the same but is rounded on one side. We cut the round side off and it fit perfectly. The factory tether connection is now the black plug that accepts 2 standard blade type connectors. We will source the proper OEM connectors and replace for the final installation.
I will get some more phots and update as we go.
Here is what we found best. All the connections where made right by the steering column in the nylon bag that protects the wiring. The white plug with brown and white wires is the AC power supply. We did not have a proper plug at this time so we used a MOLEX plug that is the same but is rounded on one side. We cut the round side off and it fit perfectly. The factory tether connection is now the black plug that accepts 2 standard blade type connectors. We will source the proper OEM connectors and replace for the final installation.
I will get some more phots and update as we go.
Attachments
Last edited:
