Pay it Forward

[canadakevin]

Hi there -

I think this is a great thread- maybe sometime I will see something I need so I thought I throw something out there.

I have a really old 10hp Chrysler outboard engine that I honestly do not know if it works as I never started it once since I got it - the guy I got it from said it did - and I have had it for three years and never tried yet - so I suspect one of you could use it more than me :d

I do not have the gas tank or attachment for it though so that you will need to figure out on your own.

I am in Millwoods in Edmonton.

Kevin

 

[canadakevin]

I also got 1 good ski off a 2001 Polaris 800 RMK and the matching one with a broken mount where the ski attaches.

Heck this is fun - I gotta go see what other stuff I can "Pay it Forward" with - I feel like my Garage is cleaner already!!!!

Kevin

 

[maierch]

I have some Rev stuff kicking around, and no Rev. Stock flap, rear shock, pod, and gutted left panel off an '06 Summit. And a lower right a-arm off an '07 Summit.

Thanks for the Snow Flap Todd!

I've got the following up for grabs:
-Stock XP Seat
-Stock XP Exhaust (Y-pipe through Suitcase)
-08 Everest Shocks about 3000k on them but if you have a bent one they will work in a pinch!
-XP bumper- Has a couple of dings in it but still works fine
-BRP heated Handler bar bag

That's what I can think of right now. I will add more as I remember it!

 

[funrider]

Great thread here I have a couple of things:

1-skidoo zx style cover only used mostly for storage the yellow on top is faded
1-Edge juice with att. programmer for dodge(came off a 07 6.7 diesel when to smarty instead)
2-moog front shocks for dodge 07 diesel
2-stock front springs off 07 dodge diesel
1-stock fuel tank for 07 dodge

thats all I can think of right now I am looking for some tracks
1-1 1/2x136 for a 2000 600 cat
1-1 1/2x136? for 07 skidoo gts sport 550 (my wife would like a ice riper)

 

[canadakevin]

Funrider,

When your ready to pay it forward with that truck - think of me....:d

 

[rusty]

i have two sleds,
one 1974 ish olympic that runs but needs a seat
and a 1972 arctic cat panther 440 with electric start
looking for a 250 elan

 

[rusty]

might have a deal between summ it up and perhaps wheeler
hey wheeler you still have that generator

 

[tko sled ed]

Adding a couple things 2 48" lights
A trap thrower
And 2 tunnel stiffeners off my xp

 

[catmando]

Adding a couple things 2 48" lights
A trap thrower
And 2 tunnel stiffeners off my xp

I will take the stiffiners from ya,buddy just boufgt a sled today and was looking for some!
catmando!

 

[tko sled ed]

sounds great what did you buy

 

[catmando]

sounds great what did you buy

Wasnt me its my buddies he bought a rt 1000 and hes a big boy so I told him he should put them on an whalaa,read your post.
He is a good friend.

 

[Mike270412]

i have two sleds,
one 1974 ish olympic that runs but needs a seat
and a 1972 arctic cat panther 440 with electric start
looking for a 250 elan

You giving my sleds away???

 

[Showtime]

Thanks for the Snow Flap Todd!

I've got the following up for grabs:
-Stock XP Seat
-Stock XP Exhaust (Y-pipe through Suitcase)
-08 Everest Shocks about 3000k on them but if you have a bent one they will work in a pinch!
-XP bumper- Has a couple of dings in it but still works fine
-BRP heated Handler bar bag

That's what I can think of right now. I will add more as I remember it!

Hey Maierch, Is the handle bar bag spoken for? Do you think it would work on REV bars? Send me a PM. Thanks.

 

[rusty]

You giving my sleds away???

nope mike still got a few more here...lol i have a few more on the line but momma will get a bit upset if i start bringing in more

 

[OVERKILL 19]

Great thread here I have a couple of things:

1-skidoo zx style cover only used mostly for storage the yellow on top is faded
1-Edge juice with att. programmer for dodge(came off a 07 6.7 diesel when to smarty instead)
2-moog front shocks for dodge 07 diesel
2-stock front springs off 07 dodge diesel
1-stock fuel tank for 07 dodge

thats all I can think of right now I am looking for some tracks
1-1 1/2x136 for a 2000 600 cat
1-1 1/2x136? for 07 skidoo gts sport 550 (my wife would like a ice riper)

I'll take the programmer!
THX

 

[underdog]

Thanks for the Snow Flap Todd!

I've got the following up for grabs:
-Stock XP Seat
-Stock XP Exhaust (Y-pipe through Suitcase)
-08 Everest Shocks about 3000k on them but if you have a bent one they will work in a pinch!
-XP bumper- Has a couple of dings in it but still works fine
-BRP heated Handler bar bag

That's what I can think of right now. I will add more as I remember it!

If the handle bar bag isn't spoken for yet I will take it.

I will pay forward a 15" Punch P1 sub in sealed box. Bought it for my truck but wont fit behind my seat.

 

[note]

Thanks for the Snow Flap Todd!

I've got the following up for grabs:
-Stock XP Seat
-Stock XP Exhaust (Y-pipe through Suitcase)
-08 Everest Shocks about 3000k on them but if you have a bent one they will work in a pinch!
-XP bumper- Has a couple of dings in it but still works fine
-BRP heated Handler bar bag

That's what I can think of right now. I will add more as I remember it!

are the shocks the front? or rear?

 

[plio7]

If the handle bar bag isn't spoken for yet I will take it.

I will pay forward a 15" Punch P1 sub in sealed box. Bought it for my truck but wont fit behind my seat.

what size is the box underdog i may be interested.....

still have a dsp bumper pull hitch for a chevy half ton early 2000's, and a 3 sided gas fireplace with lava logs ect., needs a little cleaning on the glass

hemmm what else......oh chit yea i have a brand new in the box tabletop soccer/fooseball table i won that i would be willing ot give to a good home as well.....seems to be a heavier fairly nice one but i know i will never use it

 

[underdog]

what size is the box underdog i may be interested.....

still have a dsp bumper pull hitch for a chevy half ton early 2000's, and a 3 sided gas fireplace with lava logs ect., needs a little cleaning on the glass

hemmm what else......oh chit yea i have a brand new in the box tabletop soccer/fooseball table i won that i would be willing ot give to a good home as well.....seems to be a heavier fairly nice one but i know i will never use it

The box is a Bassworx. Its 24" long/ 15.5" tall/ 12" deep at the bottom and 8.5" at the top. Thought I had a picture of it, but I guess I dont. Its a wedge design.

Edit. I also have a car I want to get out of here!
1989 VW Scirocco! Doesnt always idle proper. changed the fuel pump and filter, and that didnt help. but as long as you keep your foot on the gas it will keep running. Or if someone wants parts off of it. Thought about making a dune buggy/pasture beater with it, but i know i will never get around to it.

 

[maierch]

Thanks for the Snow Flap Todd!

I've got the following up for grabs:
-Stock XP Seat
-Stock XP Exhaust (Y-pipe through Suitcase)
-08 Everest Shocks about 3000k on them but if you have a bent one they will work in a pinch!
-XP bumper- Has a couple of dings in it but still works fine
-BRP heated Handler bar bag

That's what I can think of right now. I will add more as I remember it!

Update Guys....
The Handlebar Bag and the Shocks are spoken for.