Parting out 03 Summit 800HO

[Bogger]

As the title says, Brother blew out his 800HO, lower portion of the piston disinagrated and is somewhere in the bottom end... a drop in would be ideal.

Thanks

Ian

 

[rusty]

what does he need? i have a bunch of crap at the house

 

[teeroy]

what does he need? i have a bunch of crap at the house

got reed cages? need a set for an 03 800 HO

 

[rusty]

Pretty sure I'm at the farm but when I land I'll look


Sent from my iPhone using

 

[Bogger]

to re-use his bottom end he needs a gasket plate and to break it open and clean out all the scrap. jugs are good, boots are brand new, reeds are new. everything is good except one piston and that base plate, it's just the amount of time and inexperience to crack open the case clean and re-assemble.

Troy he may end up parting it out and if he does I'll let you know. got some nice goodies on it he could recoup most of it's value by parting.

 

[teeroy]

Pretty sure I'm at the farm but when I land I'll look


Sent from my iPhone using

when are you back in town? I'll be down there this weekend. let me know what ya got dude.

 

[rusty]

I have gaskets on my bench


Sent from my iPhone using

 

[rusty]

I'm home on the 30th bogg have it in my yard and I'll do it. Three hrs tops he will need to buy coolant, brake clean and oil


Sent from my iPhone using

 

[teeroy]

to re-use his bottom end he needs a gasket plate and to break it open and clean out all the scrap. jugs are good, boots are brand new, reeds are new. everything is good except one piston and that base plate, it's just the amount of time and inexperience to crack open the case clean and re-assemble.

Troy he may end up parting it out and if he does I'll let you know. got some nice goodies on it he could recoup most of it's value by parting.

my bud's had the pto connecting rod break. totally destroyed the engine, the only thing that may be reusable is the mag side jug, head, and primary clutch lol. got a new shortblock, went to swap out parts to the new and discovered con rod went up into the reed cage as well. crazy part was he was just crawling along a rough stretch where the farmer plowed a trail to some bales, he was doing maybe 10 km/hr and said it went bang and quit. bang is somewhat of an understatement. new drop in without core was almost 3K

 

[rusty]

Worth more running, how's the head?


Sent from my iPhone using

 

[Bogger]

head is good, but the top portion of the bottom (where the jugs bolt on) is hooped, the aluminum skirting is all broken off. The way he described it to me I thought it was a plate but when I looked at it it's the whole piece that the jugs bolt on to. probably a write off. This sled is worth more to part out then sell not running

new boss seat, jugs are good with new boots, lightweight clear hood, clutches just re-done, cdi is good, pipes are all good, can in good shape, suspension and arms etc etc etc...

but the bottom end needs to be opened and cleaned (there is a lot of aluminum in there, it has to be somewhere) It ran home on one cylinder and would run until we tore into it, now it's in pieces in my garage.

At first we thought we lucked out and it was just the rings until we pulled the piston and the whole bottom was gone....

Worth more running, how's the head?


Sent from my iPhone using

 

[teeroy]

head is good, but the top portion of the bottom (where the jugs bolt on) is hooped, the aluminum skirting is all broken off. The way he described it to me I thought it was a plate but when I looked at it it's the whole piece that the jugs bolt on to. probably a write off. This sled is worth more to part out then sell not running

new boss seat, jugs are good with new boots, lightweight clear hood, clutches just re-done, cdi is good, pipes are all good, can in good shape, suspension and arms etc etc etc...

but the bottom end needs to be opened and cleaned (there is a lot of aluminum in there, it has to be somewhere) It ran home on one cylinder and would run until we tore into it, now it's in pieces in my garage.

At first we thought we lucked out and it was just the rings until we pulled the piston and the whole bottom was gone....

the piece that the jugs bolt on is the crankcase....there is no fixing that, no real point in taking it apart and cleaning it out. with a bunch of chunks in there and riding it home I would suspect the bottom end bearings are all toast as well. she's a paperweight now

 

[rusty]

Agreed


Sent from my iPhone using

 

[teeroy]

peel them reed cage assemblies off and ask him what he wants for them boog...I'll be there tomorrow to pick 'em up

 

[rusty]

i wouldn't mind looking at it either. i might have a buyer for the whole thing.

 

[plio7]

That sucks.... Will that seat fit a cat??

 

[pete gads]

Have complete engine just need gasket kit and put top together

 

[06 Dragon]

Have a couple of heads for an 03 800, A stock one, and a cudney racing head, stock reed assemblies as well.

 

[Bogger]

how much?

Have complete engine just need gasket kit and put top together

 

[Bogger]

troy whats your email? pm me, I can post pics up here but not in PM

V-force 3 reeds with less than 3 hours on them, that was part of his service in the fall. not sure if the boots are part of the dealer package but it's all new 6 bolt fix....