P drive clutch tools

[zenk]

Does anyone near red deer want to sell their p-drive clutch tools?
Or can borrow me their clutch hold tool?

 

[gedakbx]

Are you trying to hold it to retorque it? I have ran a rachet strap around it to the foot well to hold it.

 

[M1ryguy]

Where's the best place to grab some of the tools? I want to do a clutch kit but the tools almost cost more than a kit, could just buy a puller and take it in to a shop but that isn't ideal for servicing in the future. Rachet strap works but after looking into it there does seem to be some tools that a guys would need to do the job.

 

[pano-dude]

Where's the best place to grab some of the tools? I want to do a clutch kit but the tools almost cost more than a kit, could just buy a puller and take it in to a shop but that isn't ideal for servicing in the future. Rachet strap works but after looking into it there does seem to be some tools that a guys would need to do the job.

I back shift sells everything you need

 

[Stevemtb]

Can’t speak for 850 but on the 800 you could easily do both clutches without a tool kit. Water trick is best for removing primary anyhow and you can make the other tools with threaded rod and longer bolts.

 

[gedakbx]

Clutch puller and a log piece of all thread and you can install a clutch kit no other special tools required.

 

[greenthumb]

Clutch puller and a log piece of all thread and you can install a clutch kit no other special tools required.

TRA & QRS, sure, but enlighten me please. How do you do a primary spring on a p-drive without any special tools?

 

[gedakbx]

Use the all thread to compress the spring cup in the movable sheave remove the bolts and loosen the all thread to remove the pressure

 

[greenthumb]

Use the all thread to compress the spring cup in the movable sheave remove the bolts and loosen the all thread to remove the pressure

That’s a tra. Snap ring in a pdrive

 

[gedakbx]

yes you are correct my mistake I did my 2023 a year ago I compressed the spring and removed the snap ring

 

[mikeydoo]

All thread still works with a piece of flat plate and 2 long sockets to compress the spring cup wit a bit of space to remove the snap ring.

 

[Jobu]

I"m not a sled guy but I bought a clutch holding tool for a polaris rzr and the guy I bought it from threw in a clutch holder for a polaris sled. If it'll work for you, you can have it free. DM me if you like.

 

[greenthumb]

All thread still works with a piece of flat plate and 2 long sockets to compress the spring cup wit a bit of space to remove the snap ring.

Really?
I bet you could launch a 10mm deep into orbit. lol

 

[mikeydoo]

lol the first time it felt a bit sketch but meh after that no probs. You would laugh if you saw how i do secondarys.

 

[MK4TDI]

lol the first time it felt a bit sketch but meh after that no probs. You would laugh if you saw how i do secondarys.

Does the water trick work on the p-drive, or can you get at them on the sled ?

 

[mikeydoo]

Water trick works perfect. I priced out all the tools and said no freakin way. Get creative and it gets done.

 

[gedakbx]

I think it would work but I never tried it

 

[bobsledder]

Does the water trick work on the p-drive, or can you get at them on the sled ?

It does and works well.