P/a heads in stock 13.1 and 13.6

[Chrisco]

All stocked up again if anyone needs.

 

[theunit1]

Whats the price again Chris and do you have to do any clutching ?

 

[+SLEDWRECKS+]

Just bought a 13.1 yeasterday from Chris for $400 & change.

 

[Mikew5j]

Anyone have experience with the 13.1 head around Edmonton? Any detonation with straight 91 non ethanol?

I was on the PAR web site. In the description it says the 13.1 is 3000-6000 feet, but in the pull down it says 2000-5000 feet. Edmonton and area is about 2200 feet I think.

 

[+SLEDWRECKS+]

Anyone have experience with the 13.1 head around Edmonton? Any detonation with straight 91 non ethanol?

I was on the PAR web site. In the description it says the 13.1 is 3000-6000 feet, but in the pull down it says 2000-5000 feet. Edmonton and area is about 2200 feet I think.

Lots of info on some older posts. Search PAR or scoll through the Polaris Pro section

 

[gedakbx]

Just bought a 13.1 yeasterday from Chris for $400 & change.

did this include the head cover or do you have to use you own?

 

[+SLEDWRECKS+]

Yes, head & domes. Using stock head cover.

 

[Mikew5j]

Lots of info on some older posts. Search PAR or scoll through the Polaris Pro section

I know about the search, thanks.

 

[Chrisco]

2500 feet and no det on 91

 

[Mikew5j]

2500 feet and no det on 91

Thanks Chris. I've been thinking about what you suggested at the sled show. I may be making my way to your shop soon.

 

[+SLEDWRECKS+]

Waiting on snow now...

 

[Chrisco]

Nice...... how was the install.

 

[gedakbx]

Pm me a price on a 13.6 to please

 

[Chrisco]

Done.

 

[+SLEDWRECKS+]

Nice...... how was the install.

Fine.... just forgot to torque the DET sensor - so went by feel. I think it called for 16 - 20 ft/lbs but can't get my t-wrench on it.
Pulled both sides @ 100 psi (cold) with stock head & 120 psi (cold) with 13.1 head

 

[flying frenchman]

I got 118-120 on my 2011. 1800 miles.
I think your motor is wore out. It should be higher . How many miles on your sled.

 

[gedakbx]

I got 118-120 on my 2011. 1800 miles.
I think your motor is wore out. It should be higher . How many miles on your sled.

Could be just the compression tester i have one that reads 20 psi lower than the other I haven't check my 2012 yet but will tonight. 100 is super low in my opinion also.

Check mine tonight 125 on both sides sled has 350 miles on it

 

[+SLEDWRECKS+]

I got 118-120 on my 2011. 1800 miles.
I think your motor is wore out. It should be higher . How many miles on your sled.

Motor's worn out !? - LOL. Rings may be a bit - motor is fine. The old war horse has 3100 km and still has x-hatching in cylinder walls on both jugs. And, it is a cheap azz comp-gauge. Crappy tire iirc.

 

[flying frenchman]

Hey! Mine's a crappy tire also. LOL Same comp as my buds with a Snap-on gauge. They can't be that bad.

 

[+SLEDWRECKS+]

In my case.... I hope it's a bad gauge I will have to borrow and double check it.
Mines has been bouncing around a tool box for the last few years, so hopefully I will get a few digits higher.