Outlaw tires on a Razor s

[Jonathan1986]

Hi, just looking at putting some outlaw tires on my razor and i was just wondering how people liked them on their razors. Are you snapping cv joints? Are they way better in the mud and muskeg then just the big hotns? Does the razor have enough power when they are on

 

[jgonie]

a rzr should have no prob turning them maybe get the qsc clutch kit. you will need some throttle control. i love my outlaws i had 29.5 on my brute and my tcat. love them

 

[rzrgade]

The RZR`S have lots of power to turn Outlaws..........Now ,what size are you talking? 26 to 31 is a BIG difference.........lol .What year is your rzr and do you have a lift (2inch). Do you have stock axles?
The 2011 and newer rzrs have crappy axles,and if you run big outlaws and get on the throttle,you WILL break axles...........The QSC clutch kit is good as said above,but 28`s and smaller you would not need it.......

 

[Jonathan1986]

Thanks for the info. Do they make a big difference in the mud and muskeg?

 

[RZR101]

mud very much yes. muskeg they will work. depends on the type of skeg, mossy or black. mossy don't spin, black pin her and hope for a bottom.

 

[Jonathan1986]

Im looking at getting 29.5 outlaws(not radials). And i have a 2011 desert tan rzr s i have a clutch kit and no lift. Would i need a lift to run them or wheel spacers? If i were to get after market axles wat would you recommend.

 

[rzrgade]

A 2 inch lift (racertech) is advisable,but not necessary. I would replace all axles with super ATV rhino axles.Don't need wheel spacers.
Make sure you have the right clutch kit ,set up right !! Call Adam at QSC (quad shop customs) for good advice..........With those tires you do not want a high stall, or you will be breaking stuff....................

 

[goodngrubby]

ooooorrrrrrrr.....you could save yourself a ton of cash and grief....and leave it stock.

 

[jgonie]

but thats no fun. half the fun is modding these things. mods ftw