Nose Cone Replacement

Chevra

Active member
Joined
Oct 15, 2016
Messages
31
Reaction score
10
Location
Saskatchewan
Has anyone replaced a nose cone on an AXYS yet? Cracked mine up in Fernie. I think I will leave it for a while until it gets really bad. Just wondering how much of a pain in the butt it is to do. The last one I did was on an 09 Polaris and it wasnt that fun.

Just a side note here, the Arm Candy brackets that I put on my sled sure work for stiffening them up. My a-arms took a beating in the mountains and I don't think anything bent (at least nothing noticable yet).
 

adamg

Active VIP Member
Joined
Mar 8, 2011
Messages
3,489
Reaction score
4,732
Location
S'toon,SK
Has anyone replaced a nose cone on an AXYS yet? Cracked mine up in Fernie. I think I will leave it for a while until it gets really bad. Just wondering how much of a pain in the butt it is to do. The last one I did was on an 09 Polaris and it wasnt that fun.

Just a side note here, the Arm Candy brackets that I put on my sled sure work for stiffening them up. My a-arms took a beating in the mountains and I don't think anything bent (at least nothing noticable yet).

Word of warning, after strengthening your A arms, next to fail will be spindles.
 

Chevra

Active member
Joined
Oct 15, 2016
Messages
31
Reaction score
10
Location
Saskatchewan
Word of warning, after strengthening your A arms, next to fail will be spindles.

I believe that. Will replace them when needed. I smoked a rock with the one and it sheared the side off a bit. I have no idea how it didn't break but its still holding on haha. After watching a friend break his bulkhead on his Doo on the weekend I am glad to have a-arms that will break first.
 

Lynn

Active member
Joined
Oct 29, 2012
Messages
119
Reaction score
220
Location
Athabasca
Hubby changed the nose cone on my AXYS tonight, wasn't too bad, less than an hour job.
 

Chevra

Active member
Joined
Oct 15, 2016
Messages
31
Reaction score
10
Location
Saskatchewan
That is good to hear! Is it riveted on? Might be time for me to invest in a skid plate as well.
 

SnowJunkie82

Active VIP Member
Joined
Feb 25, 2010
Messages
412
Reaction score
1,209
Location
Champion, Ab
In the process of changing mine. As stated above, not a big job. Remove the hood, pipe and front bumper. Six rivets (four in engine bay, two underneath), replace and done.
 

Chevra

Active member
Joined
Oct 15, 2016
Messages
31
Reaction score
10
Location
Saskatchewan
Sounds pretty easy to me. Did you order right from your dealer of from somewhere else?
 

blackhorse04

Member
Joined
Sep 11, 2007
Messages
6
Reaction score
2
Location
Calgary
I have a spare red one that I would sell for good deal if that's the colour you are looking for?
 
Top Bottom