Need Help After carb cleaning.

oldtimer

Active member
Joined
Mar 22, 2007
Messages
36
Reaction score
8
Location
Edmonton
2010 XP Removed carbs to clean. First go at it and ended up removing fuel tank and related parts to do it. Reassembled except no covers. Nothing on elec start, no flicker on pull start.
Checked all connections. Fuses beside solenoid good. Upper two fuses no current either side. Disconnected battery before starting removal. Only two electrical connections disconnected during carb removal.
Any ideas?? Thanks
 

oldtimer

Active member
Joined
Mar 22, 2007
Messages
36
Reaction score
8
Location
Edmonton
Found problem. Read a post regarding same problem. Power wire to battery under boot wasn’t hooked up. I had put a new battery in and must have missed small wire. Oops! That to all that read post.

Question. Do i need to take to dealer to Hookup to Bud?? thanks
 
Top Bottom