Need cheap drums for 1990 Big Bear 350

Pinebeatle

Active member
Joined
Dec 27, 2010
Messages
136
Reaction score
53
Location
Prince George
Need cheap front drums for 1990 Big Bear 350 4x4 Its an old ATV and I cant see myself spending $400+ Cnd for new ones from Yamaha. CV spline polished off spline inside drum so now no 4x4 and will surely screw up CVs and there pricey as well--- After market??? Any Hope on this? :( Many thanks
 

kingkris06

Active VIP Member
Joined
Sep 7, 2008
Messages
199
Reaction score
66
Location
nw of edmonton
check some of the recycle places , should be a common enough quad. or put a want add for a donar quad

also check ebay , i got a new axle for my 660 for $135, so a half shaft should be cheaper.
 

jaredvh

Active member
Joined
Dec 16, 2008
Messages
126
Reaction score
15
Location
Red Deer
Also check cheapcycleparts.com, Shipping is relatively quick. I fixed up my grizzly for about 70% of what it wuld have cost me thru Yamaha.
 

tnt-salvage

Active VIP Member
Joined
Mar 11, 2012
Messages
274
Reaction score
157
Location
vernon bc
i will look tomorrow for you, but i dont think i will have any left. if i have some we sell them for $80.00 a drum.
on another note, im not sure how this would work but i do have a 1999 big bear that has disc brakes on the front. i have both axles spindles rotors and calipers, brake lines and front master. the bikes physically did not change from way back when to 1999. they still look the same. so i dont think the trac width would be way out to lunch and theses parts might go right in?

complete swap would probably be $700.00 for all parts i listed above.
 

Pinebeatle

Active member
Joined
Dec 27, 2010
Messages
136
Reaction score
53
Location
Prince George
i will look tomorrow for you, but i dont think i will have any left. if i have some we sell them for $80.00 a drum.
on another note, im not sure how this would work but i do have a 1999 big bear that has disc brakes on the front. i have both axles spindles rotors and calipers, brake lines and front master. the bikes physically did not change from way back when to 1999. they still look the same. so i dont think the trac width would be way out to lunch and theses parts might go right in?

complete swap would probably be $700.00 for all parts i listed above.
I got a drum for 100 bucks but the other drum is on borrowed time. Changing to disks brakes would be so nice!! Come spring I will surly look into that as I dont know if it will work and short on cash---But if you have a drum I would be interested in that :p
 

tnt-salvage

Active VIP Member
Joined
Mar 11, 2012
Messages
274
Reaction score
157
Location
vernon bc
sorry, i looked and there are no drums left for the front. i have one or two rears left and the disc breaks for the front.

let me know
 
Top Bottom