Muff pot on 174xm

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
I put the muffpot on my pipe, it works well. It won't sear a steak, but it gets the job done. Heats stuff up just right. IMG_2065.jpg
 

AaronQ

Active VIP Member
Joined
Feb 11, 2012
Messages
673
Reaction score
533
Location
Innisfail Alberta
I put the muffpot on my pipe, it works well. It won't sear a steak, but it gets the job done. Heats stuff up just right.View attachment 207783
Ya I don't have room up on top of my pipe to do that. I'll wiggle it back to the shop tomorrow and see if I can figure out a better way to get crap warm. My wife thinks she wants a new sectional this Christmas so chances of getting a things can are slim
 

Mike_1987

Member
Joined
Oct 20, 2007
Messages
22
Reaction score
3
Location
Morinville
0e642422f0e6f21566a4acf63a0b5e55.jpg


Just installed mine here. I haven’t used it yet so I’m not sure how good it works, but the pipe there gets pretty warm at idle.
 

Tchetek

Active VIP Member
Joined
Nov 11, 2013
Messages
2,827
Reaction score
7,180
Location
Alberta
That"s nice...warm up leftovers in 45 mins. What if the rider decides he/she is hungry and would like to eat in 10 mins ? Drive around in circles for 35 mins ? The thing in 5-7 for leftover's. You put your food on before the break. And yes it will do raw meats just stop and turn the pot around and Doo the other side. Do not pack too tight so lunchie will get stirred. What do you do if you stop for a break before 35 mins, reset the timer ? Be the envy of your friend's even if you ride a cat,LOL.

I have Muff pot on top of the 90* into the can like the couple pics!

No it’s not 10 minutes hot, but I like the slow cooker effect it had.


It won’t burn anything so just keep it loaded right from the trailer. Snack is ready when ever you want it. I can’t plan ahead to load it precisely 6 minutes before the other people in the group also plan to stop.

Also love to buy a couple mcdicks sausage McMuffs and a couple cheese burgers the night before. They come pre wrapped in pachment paper, toss them in, ride for the morning, and serve up better then fresh at any Unplanned pit stop.
 

AaronQ

Active VIP Member
Joined
Feb 11, 2012
Messages
673
Reaction score
533
Location
Innisfail Alberta
I have Muff pot on top of the 90* into the can like the couple pics!

No it’s not 10 minutes hot, but I like the slow cooker effect it had.


It won’t burn anything so just keep it loaded right from the trailer. Snack is ready when ever you want it. I can’t plan ahead to load it precisely 6 minutes before the other people in the group also plan to stop.

Also love to buy a couple mcdicks sausage McMuffs and a couple cheese burgers the night before. They come pre wrapped in pachment paper, toss them in, ride for the morning, and serve up better then fresh at any Unplanned pit stop.
I'll try it and see. Love the McDonald burgers in there. We make a lot of our own sausage so it's nice to heat them up.
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
Thats strange, I have done 6 of them so far, ranging from 2008 to 2016
Ya I don't have room up on top of my pipe to do that. I'll wiggle it back to the shop tomorrow and see if I can figure out a better way to get crap warm. My wife thinks she wants a new sectional this Christmas so chances of getting a things can are slim
 

CUSO

Active VIP Member
Joined
Jan 21, 2007
Messages
4,772
Reaction score
5,538
Location
Edmonton
That shouldn't matter that much, The mid range is the hottest EGT on a rotax.

Put it this way, If I fill my muffpot with lasagna at the beginning of the day, it is hot by mid morning.


What sled setup. With the 174 I'm a pretty little guy so it's not wide open very much.
 

Bnorth

Active VIP Member
Joined
Dec 18, 2010
Messages
10,767
Reaction score
20,781
Location
Salmon Arm
I have Muff pot on top of the 90* into the can like the couple pics!

No it’s not 10 minutes hot, but I like the slow cooker effect it had.


It won’t burn anything so just keep it loaded right from the trailer. Snack is ready when ever you want it. I can’t plan ahead to load it precisely 6 minutes before the other people in the group also plan to stop.

Also love to buy a couple mcdicks sausage McMuffs and a couple cheese burgers the night before. They come pre wrapped in pachment paper, toss them in, ride for the morning, and serve up better then fresh at any Unplanned pit stop.
This perfectly describes my feeling towards cookers. I'm up there to ride not be a chef. Loader up and eat when you feel like it.
 

Joholio

Active VIP Member
Joined
Nov 20, 2012
Messages
35,161
Reaction score
29,699
Location
Hespero/Sicamous
This perfectly describes my feeling towards cookers. I'm up there to ride not be a chef. Loader up and eat when you feel like it.

I wish I had a pic of your face on day two of when the ‘muricans were up! ? Thing cooker can rules lol
 

cattechsummitrider

Active VIP Member
Joined
Nov 27, 2006
Messages
4,007
Reaction score
3,095
Location
sask
Really happy with it, not as fast as the thing cooker can, but at least I don't loose rpm with it, ( had a thing cooker and lost 600 rpm with it) and it looks better.
Going to have to do the same thing with my g4 can
 

AaronQ

Active VIP Member
Joined
Feb 11, 2012
Messages
673
Reaction score
533
Location
Innisfail Alberta
Really happy with it, not as fast as the thing cooker can, but at least I don't loose rpm with it, ( had a thing cooker and lost 600 rpm with it) and it looks better.
Going to have to do the same thing with my g4 can
What caused it to loose rpm?
Sure it wasn't just clickers not set right
 

cattechsummitrider

Active VIP Member
Joined
Nov 27, 2006
Messages
4,007
Reaction score
3,095
Location
sask
clickers set on 3 ,,, rode that day 7900 all day at Sale,,, Installed cooker can,,, hits 7300 at Sale same area moved clickers up 2 revs 7800 ,,, next day install original can- over reving moved clickers down 2,, 7900,,,,,
I like the people at the sled shed I think Al does some good work, I have alot of respect for him and the crew,, He had helped me out more than a few times, There are times though I think that Q.C. is a little lax,,, Took that one back they did give me another can the next trip out but by then I had built this one.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,552
Reaction score
16,983
Location
DA Moose B.C
I've never had my cooker screw up rpm

Had it in 2 xm's, 9000 km on one and 700 on the other

Took it off the 14 and never changed clickers, put stock back on, runs same rpm



Mabe issues with baffles inside??
 
Top Bottom