MTNTK pump gas kit.

[Chrisco]

Still on the fence, the Viper has caused the descion to be tough that and there doesn't seem to be any reason NOT to run a MTNTK kit...
This weekend should help things.

Are you riden this weekend??

 

[Kibbels]

So I've got about 200 miles on my 2014 Pro with the MTNTK turbo kit installed, and 600 miles total. I'm considering a couple things. 1. Adding some additional intake venting so the hair dryer can pull a bit more air in. My buddy with a BD turbo is using an SLP intake vent and it seems good. The MTNTK crew are trying to develop their own, but that's a ways away from production. What, if any, are you guys using? 2. Are any of you guys running a 3" track? The MTNTK guys are using it on their test sled, but they've also busted quite a few of the orange clutch springs, which leads me to think a 3" is a bit stressful on the clutch hardware. Anyway, I'm just curious about what others have found with the combination. I've cranked up my boost a bit and have switched to running VP C111 which seems awesome! So far so good!

Yes as Chris indicated the Fire & Ice is a must and works great...

 

[scrfce]

Are you riden this weekend??

I am. Just had a killer ride south of blu, u makin it there? Id love to give ur set up pros a shot

 

[Chrisco]

At allen creek tomorrow. 217-9141

 

[dragonweld28]

We rode last Friday in Salmon and i got to ride Paul's turbo again. They had done a few more tweeks to a few things and it was really working well. Its a 174 3 inch track and it was pulling hard. Here is a short video of me taking it for a rip. We were riding in over 2 feet of fresh snow.

GOPR0091 - YouTube

 

[pistoncontracting]

Seems to run good. Whats the throttle like when your on and off a little more from a stop??

Sent from my SGH-I337M using Tapatalk

 

[Chrisco]

Seems to run good. Whats the throttle like when your on and off a little more from a stop??

Sent from my SGH-I337M using Tapatalk

Same as stock.

 

[melroy]

Hi Chrisco,
I have a 2014 Pro 163 with 400 km's, would you reccomend the MTNTK piston kit install at same time as the turbo? Also are you going to be stocking the piston kits and turbo kits this summer? I would like to drop off the sled and have your shop install but live in Prince George.

Thanks

 

[Chrisco]

Yes I will have both kits in stock all summer, and yes it is a good idea to do the pistons as well but at 400km not necessary yet. No prob we can do it anytime for ya.

Thanks Chris

 

[melroy]

Yes I will have both kits in stock all summer, and yes it is a good idea to do the pistons as well but at 400km not necessary yet. No prob we can do it anytime for ya.

Thanks Chris

okay thanks, Hoping to drop sled off, tour West Edmonton Mall with my wife for a day or so (lol) then pick it up again, would that be okay?
I would get your shop to do the piston kit, and turbo install all at the same time, I will call ahead and set up a date in the summer.
thanks again Mel

 

[Chrisco]

Ya for sure just let me know.

Thanks Chris