Moving 2012 proclimb skid to 2014

[ktmsx350f]

Who all has moved there skid on the 12s to the 14s location? Did mine but the track is way to tight with adjusters fully backed off.

 

[Allseasons]

I haven't, but 2 days ago I read a post on Snowest on this topic. Some seem to work, other buy or built an offset axle

 

[TylerG]

Who all has moved there skid on the 12s to the 14s location? Did mine but the track is way to tight with adjusters fully backed off.

We did. Had to order new rear mounting points from CR Racing.

 

[ktmsx350f]

We machined up new relocation brackets to the same specs that they are sold but track is to tight. It’s a pretty new track but still to tight to run

 

[TylerG]

We machined up new relocation brackets to the same specs that they are sold but track is to tight. It’s a pretty new track but still to tight to run

Did you drop the front mounting points to be the same as on the 14?

 

[ktmsx350f]

Yes front mount is exactly where the the 14 is

 

[TylerG]

You should be good then. That's what we had to do for our 12.

 

[leadfoot33]

i did see to do it there was an axle or somthing that had to be bought.

i prefered the way the 13 skid setup was anyways. you could do that. makes a big difference

 

[ZRrrr]

Dropped front of my 12 down and back and installed newest rear brackets so could drop there too. No issues and like it much better as the front end comes up easier. I was given the attached template to use.

 

[heavybog]

Dropped front of my 12 down and back and installed newest rear brackets so could drop there too. No issues and like it much better as the front end comes up easier. I was given the attached template to use.

Do you install anti stab kit with 2013 mods on your 2012 ?