Mounting a Garmin 60Cx

Smithys

Active VIP Member
Joined
Dec 7, 2008
Messages
248
Reaction score
37
Location
Airdrie, Alberta
Looking for suggestions/ideas on the best way to mount a Garmin Cx on a 2010 Polaris RMK 800.
 

Snort

Active VIP Member
Joined
Aug 10, 2007
Messages
166
Reaction score
61
Location
Consort, Alberta
I have the 60Csx and I simply used the handlebar mount. I never had any trouble over the last couple of years.

I do attach the tether also just in case of a mount failure.
 

99summitx

Active VIP Member
Joined
Apr 21, 2007
Messages
1,650
Reaction score
106
Location
Red Deer AB
Go with Ram mounts, very secure and lifetime guarantee, endless different ways to mount.
 

kbrunlees

Active VIP Member
Joined
Sep 24, 2010
Messages
1,704
Reaction score
1,364
Location
Edmonton
I got a kit from Whole sale sports, a handle bar mount, took a piece of conduit and bent into a U. hammered one end on a round surface so that the pice would fit the profile of a rack. Added two gear clamps to hold in place and put the mounting kit for the GPS on the other end. Their is no room on a Can-am Max XT to put in on ahandle bar. as an added benefit if I should hit a branch it just folds back. I should mention that I attached to the fron rack of the quad. I will take a picture of it later if you would like.
 

Smithys

Active VIP Member
Joined
Dec 7, 2008
Messages
248
Reaction score
37
Location
Airdrie, Alberta
Picked up a RAM Mount at GPS Central in Calgary. Not many spots on the Polaris RMK's to mount a GPS ( handle bar or dash ).

Here is couple of pictures.
 

Attachments

  • Oct 31 067.jpg
    Oct 31 067.jpg
    50.7 KB · Views: 280
  • Oct 31 069.jpg
    Oct 31 069.jpg
    58 KB · Views: 277

Wingwalker

Active VIP Member
Joined
Nov 25, 2009
Messages
240
Reaction score
113
Location
Beiseker Alberta
Picked up a RAM Mount at GPS Central in Calgary. Not many spots on the Polaris RMK's to mount a GPS ( handle bar or dash ).

Here is couple of pictures.

Thats the same place I mounted my gps on my Fusion using the ram mount system
I used a 3m adhesive pad and also 2 small screws for added strength
Seemed to be the best place on my sled it clears the handlebars at full lock and is protected by the screen
 

kimrick

RIP Fellow Sledder
Joined
Nov 28, 2009
Messages
2,236
Reaction score
6,304
Location
In Heaven & Revelstoke
I would personally not mount it. I would keep my head up and pay attention.

Have a local sewing shop build a zipper poccket (not the ones already in the coat, a special GPS holder) in your coat or pack so it still recievs tracking information and bring it when you need it to back track.

Kinda like an avalanche beacon is my thought.

If it is not with you. what good is it!

OOps my sled went way too far down a steep hill....Cliff, and I have to walk out in dark?

Flashlight and your handy dandy trust GPS (for back tracking) that is with you helps.

Just a thought because it works well in the pocket I made for my sled coat.
 
Last edited:

RollnThndr

Member
Joined
Dec 27, 2009
Messages
18
Reaction score
0
Location
Canada
I would personally not mount it. I would keep my head up and pay attention.

Have a local sewing shop build a zipper poccket (not the ones already in the coat, a special GPS holder) in your coat or pack so it still recievs tracking information and bring it when you need it to back track.

Kinda like an avalanche beacon is my thought.

If it is not with you. what good is it!

OOps my sled went way too far down a steep hill....Cliff, and I have to walk out in dark?

Flashlight and your handy dandy trust GPS (for back tracking) that is with you helps.

Just a thought because it works well in the pocket I made for my sled coat.

Good point!
 
Top Bottom