Looking for Turbo suggestions

[Timber_12]

Finally my sleds running. And running good from what I seen.

Final problems were:

TPS sensor issues. Not exactly sure what they were, just one thing that was mentioned.

Throttle body screws had backed out and the throttle bodies were falling apart. Not too sure how this happened because we did that part at the dealership, and I remember using locktite, but that's what the big problem was.

We were in the process of dynoing it when the dyno computer buggered up. Highest pull was 227.7 at 10lbs. Would be nice to see more but I'm just happy to be getting my sled back.

 

[BDF#900]

Good to hear!

 

[Deano670]

Finally my sleds running. And running good from what I seen.

Final problems were:

TPS sensor issues. Not exactly sure what they were, just one thing that was mentioned.

Throttle body screws had backed out and the throttle bodies were falling apart. Not too sure how this happened because we did that part at the dealership, and I remember using locktite, but that's what the big problem was.

We were in the process of dynoing it when the dyno computer buggered up. Highest pull was 227.7 at 10lbs. Would be nice to see more but I'm just happy to be getting my sled back.

Glad to here timber, the throttle body set up is CRITICAL on these. Find this tool to be most useful

Deano

MAD MOTORSPORTS

 

[mynewuseddoo]

So it wasn't an issue with cutler's stuff at all eh? Good to hear. I hope it works great for you this winter.

So Timber, is the CPC kit good now and not junk?

 

[Mayfly]

Slowly getting my kit installed, just need to sync the TPS and maybe get the throttle bodies synced as well. Hey Deano670, can I just take the throttle bodies to an AC dealer and have them do it, or do they need the sled?
So far am happy with the fit of the turbo, everything seems to be going together well. Just need to finish wiring and adding heat tape to needed places.

 

[Deano670]

Slowly getting my kit installed, just need to sync the TPS and maybe get the throttle bodies synced as well. Hey Deano670, can I just take the throttle bodies to an AC dealer and have them do it, or do they need the sled?
So far am happy with the fit of the turbo, everything seems to be going together well. Just need to finish wiring and adding heat tape to needed places.

You are gonna go right past my door step. I'll do it for you

 

[Mayfly]

Thanks Deano
Well I guess I'll be seeing you, not sure when as work is busy. But do need to get er done before the snow flies.

 

[Deano670]

Just give me a shout, 780 717 4314

Deano

MAD MOTORSPORTS

 

[Mayfly]

Thanks Deano,
I will give you a call once back in town.
Lorne

 

[BDF#900]

M'fly saw your kit yesterday. Don't think there is a better lookin kit out there. Lots of billet and CNC stuff. I think when others see it, they're gonna be wishing they went that way.

 

[2manykids]

M'fly saw your kit yesterday. Don't think there is a better lookin kit out there. Lots of billet and CNC stuff. I think when others see it, they're gonna be wishing they went that way.

If you saw his then i must have seen yours last week. All i will say is that sled must rip.

 

[BDF#900]

Worked pretty sweet as a 1 liter with a 2.5" track.

YouTube - BDF chute climb

Cann't wait for 1.2 liter version with a 3".

 

[2manykids]

Worked pretty sweet as a 1 liter with a 2.5" track.

YouTube - BDF chute climb

Cann't wait for 1.2 liter version with a 3".

I had a good look at your hood vent , wasnt sure how well they sat on the hood. The 3" was all rolled up just waiting to be stuffed under. Dont think there will be much of an issue spinning that one around. Post a vid on the snow

 

[Deano670]

Mmmm can you say 3 inch:d

 

[2manykids]

Looks good .

 

[2manykids]

Saw your sled today Mayfly, looks very nice.

 

[CRF230LKEL]

Twisted and Cutler both offer great turbo kits, and also great customer service from both.
To me its flip a coin on those two choices, as both are awesome!