Looking for S Module

[Junior Highmark]

Looking for an S module for a 2015 Xm Summit X 174 t3 thats not $454 plus tax like the stealership wants.

Are these removable from sleds or destroyed on installation? Any used ones kicking around? Blew mine up pretty good early season, looking to try to have one for this weekend.




I didnt walk to where I was sitting.

 

[jpmez69]

Looking for an S module for a 2015 Xm Summit X 174 t3 thats not $454 plus tax like the stealership wants.

Are these removable from sleds or destroyed on installation? Any used ones kicking around? Blew mine up pretty good early season, looking to try to have one for this weekend.






I didnt walk to where I was sitting.//uploads.tapatalk-cdn.com/20191224/c9c8df6f17920af88fab42cae286fd42.jpg

The E and S modules can be removed intact. Just can't get rammy with it. Might be hard to find a parts sled somewhere with those pieces in good condition though. If it's badly damaged, I would do both for peace of mind. That way, everything will be true as far as engine alignment goes.

 

[Junior Highmark]

Its only cracked at the a arm since i hit the stump sideways somehow. I didnt hook anything. Did a good inspection. E module can be done next weekend if needed but Im attempting to ride this weekend.

Advice well appreciated though. Im new to owning an xm and already kinda destroying the thing.

 

[lilduke]

Depending on how bad it is, might beable to just brace it, and run it. If you don't want to spend too much$

 

[Junior Highmark]

Depending on how bad it is, might beable to just brace it, and run it. If you don't want to spend too much$

The alignment is pretty far out, it cracked on the bore of where the a arm mounts. It let it move a lot.

 

[lilduke]

The alignment is pretty far out, it cracked on the bore of where the a arm mounts. It let it move a lot.

I have hammered them back straight before and run them. Obviously not the best way to repair it, but it can get you back on the snow for cheap.

Edit: not the cast aluinum piece. If its broke, yeah you need a new one.



Maybe post a picture if you can

 

[Junior Highmark]

I have hammered them back straight before and run them. Obviously not the best way to repair it, but it can get you back on the snow for cheap.

Edit: not the cast aluinum piece. If its broke, yeah you need a new one.



Maybe post a picture if you can

Yeah its the cast aluminum part that broke lol. Is it possible to tig weld cast aluminum?

No pictures until i pick the sled up from rknight111, unless he has pics of it

 

[lilduke]

Yeah its the cast aluminum part that broke lol. Is it possible to tig weld cast aluminum?

No pictures until i pick the sled up from rknight111, unless he has pics of it

I think you'd need Jessie James the master fabricator on the tig to have any hope haha

 

[Junior Highmark]

I think you'd need Jessie James the master fabricator on the tig to have any hope haha

Is it possible? We have one of those at my railroad heavy equipment shop.

 

[lilduke]

Is it possible? We have one of those at my railroad heavy equipment shop.

Only one way to find out I guess. I know its not easy, but if you have nothing to loose, doesn't hurt to try.

 

[pfi572]

Have a perfect E module on the shelf but it’s in Grande Praire and $350.00
If you have someone coming through ?

 

[oler1234]

Yeah its the cast aluminum part that broke lol. Is it possible to tig weld cast aluminum?

No pictures until i pick the sled up from rknight111, unless he has pics of it

Lower rear a-arm point, if this is cracked you can brace it and run it. Mines living currently, get the skidoo brace for 60. You can rig these things up, we rig welded a e-module up and all is good. Your call but you can repair these things.


post a picture if possible.

 

[Junior Highmark]

Have a perfect E module on the shelf but it’s in Grande Praire and $350.00
If you have someone coming through ?

We have constant people coming and going there.. Ill pm you if I can make it work

 

[Junior Highmark]

Lower rear a-arm point, if this is cracked you can brace it and run it. Mines living currently, get the skidoo brace for 60. You can rig these things up, we rig welded a e-module up and all is good. Your call but you can repair these things.


post a picture if possible.

An attempt will be made to repair it to get by for 1 trip on boxing day. Pictures will be posted. Worst case Ill head to the stealership and pick one up

 

[Junior Highmark]

Spindle bent and angle changed which explains my ski tips not lining up and gap in shock. Broke the s module for sure. Gonna bend it straight and weld a bracket up to get me through the weekend.

 

[SLEDBUNNYRACING]

Good luck with this Justin.
Make sure you carry a few ratchet straps just in case it does fail in the back country. Straps and some wood can get you off the mtn.

 

[pfi572]

If needed ?

 

[Junior Highmark]

//uploads.tapatalk-cdn.com/20191226/fde30d4fa0093bf4cfffcb4013a6d3dd.jpg
//uploads.tapatalk-cdn.com/20191226/2d2c1c23b27b90937beecbf38b6d4a3c.jpg
//uploads.tapatalk-cdn.com/20191226/8cbfd65e12a30981e443f0e4f0d7fd1c.jpg
If needed ?

How much and location?

 

[pfi572]

How much and location?

$350
Grande Praire
I thought I would just post a couple pics so you could see it.