Long term Turbo Mav update .

rzrgade

Active VIP Member
Joined
Sep 22, 2008
Messages
7,580
Reaction score
14,760
Location
West of Toronto
Well with well over 1300 hard k I have to say I am extremely pleased with the reliability of the turbo Maverick !
So far not one issue ...0 .stock belt changed out ,though it is still in great shape . Front end and all axles/ joints / bushings / bearings still tight .

Only maintenance so far front brake pads . 0 warranty issues and , not one single issue...
This is with 30 inch tires from day one as well!
So needless to say, very happy . Only down side is a little harder to work on but only require basic maintenance so far ....
They should come with a better skid plate & tougher fenders ....
And I am not sold on the QE visco lock , but it is still a good setup 99% of the time ...

Other than that a great trail machine .
Lots & lots of power , great handling and very nimble on the trail as well.

And apparently the turbo is bulletproof in the mud & water as well...
For the price on the turbos I would highly recommend one ...



Sent from my iPhone using Tapatalk
 

Ronaha

Active VIP Member
Joined
Dec 11, 2015
Messages
1,606
Reaction score
3,038
Location
Narnia
If your fully snorkelled,can you submerge the turbo with no problems?
 

rzrgade

Active VIP Member
Joined
Sep 22, 2008
Messages
7,580
Reaction score
14,760
Location
West of Toronto
Yes , no issues at all ...
Also the turbo is mounted quite high .
They are a biotch to snorkel the belt exhaust though.
But I have never heard of a turbo failure on a Mav yet .


Sent from my iPhone using Tapatalk
 

camoJoe

Active VIP Member
Joined
Jun 20, 2013
Messages
482
Reaction score
420
Location
Alberta bound
Great to hear the Maverick has treated you well,... just wondering what kind of brake pads you used to replace the "old" ones ?
 

rzrgade

Active VIP Member
Joined
Sep 22, 2008
Messages
7,580
Reaction score
14,760
Location
West of Toronto
I went back stock again , as the originals did well...
And I had no time to pickup aftermarket ones as well.
Bet you are looking forward to the jamboree?


Sent from my iPhone using Tapatalk
 

xpbrian

Member
Joined
Jan 28, 2010
Messages
16
Reaction score
0
Location
chestermere
I concur.I bought an ex rental machine so I suspect has not had it easy.nothing is worn out but did find remnants of first belt in housing!! I'D like to put doors on mine.What make are yours and how do they fit?
 

rzrgade

Active VIP Member
Joined
Sep 22, 2008
Messages
7,580
Reaction score
14,760
Location
West of Toronto
Kimpex , I like them a lot ...
Easy to mount & nice door latch .


Sent from my iPhone using Tapatalk
 

camoJoe

Active VIP Member
Joined
Jun 20, 2013
Messages
482
Reaction score
420
Location
Alberta bound
I went back stock again , as the originals did well...
And I had no time to pickup aftermarket ones as well.
Bet you are looking forward to the jamboree?


Sent from my iPhone using Tapatalk
Yes we Sure are, Last year was a blast, and the rain on the end topped it all up, the Family that we invited is hooked as well !!
 
Top Bottom