Let's Talk Travel Trailer Sway

TylerG

Super Mod Geek
Administrator
Moderator
Joined
Nov 7, 2006
Messages
31,479
Reaction score
29,337
Location
Parkland County
have good year marathons on current trailer, they are almost worn out, going to put another set on it in the spring. Dad's trailer has some knock off garbage that are wearing fast
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,785
Reaction score
8,085
Location
Calgary/Nelson
So what about a one ton dually pulling a 16,000 lb toy hauler or a 12,000 kg rig pulling a 51,000 kg super B?

Generally the heavier the trailer the bigger it is too and it is a big sail in a wind storm. Are you going to feel it, hell yes and it can be downright dangerous. My point is that you less likely to run into problems if the truck is heavier than the trailer. I've seen many semi trailers flipped on their sides on highway 22 southwest of Calgary.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,785
Reaction score
8,085
Location
Calgary/Nelson
I've pulled everything from 10ft single place sled trailers to 35ft goosenecks with trucks ranging from a Ford ranger to dodge 3500. Never had even a hint of sway and its always been a standard hitch(except the gooseneck obviously). I think that weight balance has everything to do with it, especially just last night I watched the guy in front of me almost hitch the ditch due to his trailers death wobble. When I got close enough to see his load there was about 6 feet hanging off the back and probably negative weight on the tongue.




Sent from my iPad using Tapatalk

There is no excuse for sway when it's not windy as there are good products to reduce this and if weight distribution is your problem then fix it. If you have your rig set up right you still can run into problem driving into a storm like we get in Southern Alberta.
 

Absledder

Active VIP Member
Joined
Oct 29, 2013
Messages
760
Reaction score
685
Location
bonnyville
There is no excuse for sway when it's not windy as there are good products to reduce this and if weight distribution is your problem then fix it. If you have your rig set up right you still can run into problem driving into a storm like we get in Southern Alberta.

I completely agree. Southern Alberta is a different animal with the wide open space, I'm up north in the bush lol. And I completely agree there's no excuse for continuing to travel when your load is swaying, like I said that was a stranger I encountered on the road that was swaying all over.


Sent from my iPad using Tapatalk
 

landownunder

Active member
Joined
Nov 24, 2013
Messages
38
Reaction score
6
Location
Edmonton
I have a 25' bumper pull toyhauler with a 12' garage. It does fit both of my quads inside the garage but the one time I tried to pull it with both quads inside the swaying was scary as hell....just no way to get enough weight further forward. It's my first travel trailer and I hadn't even considered that it might sway when I bought it, I was just glad I could fit both quads in the garage but was pretty disappointed to find out it wasn't gonna work. Now I put one quad in the back of the truck and one in the toyhauler. With a set of air bags and friction sway controllers it pulls nicely now, but has my Nissan Titan working pretty damn hard..... In my situation the friction sway controllers worked perfectly, might be overkill but I use two of them because they are cheap and the idea of the trailer swaying again scares the crap out of me. I'm going to be upgrading to a diesel for next spring though!
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
I have a 25' bumper pull toyhauler with a 12' garage. It does fit both of my quads inside the garage but the one time I tried to pull it with both quads inside the swaying was scary as hell....just no way to get enough weight further forward. It's my first travel trailer and I hadn't even considered that it might sway when I bought it, I was just glad I could fit both quads in the garage but was pretty disappointed to find out it wasn't gonna work. Now I put one quad in the back of the truck and one in the toyhauler. With a set of air bags and friction sway controllers it pulls nicely now, but has my Nissan Titan working pretty damn hard..... In my situation the friction sway controllers worked perfectly, might be overkill but I use two of them because they are cheap and the idea of the trailer swaying again scares the crap out of me. I'm going to be upgrading to a diesel for next spring though!

I had a friction bar on my first set up, seamed to work ok. I bought this Husky set up this time, my trailer is 36' and I don't look back.
Do you have load equalizer bars? If so you might have them cranked up too much with both quads in back. Take some tension out of bars it might put more weight on your pin/ball.
 

landownunder

Active member
Joined
Nov 24, 2013
Messages
38
Reaction score
6
Location
Edmonton
I had a friction bar on my first set up, seamed to work ok. I bought this Husky set up this time, my trailer is 36' and I don't look back.
Do you have load equalizer bars? If so you might have them cranked up too much with both quads in back. Take some tension out of bars it might put more weight on your pin/ball.

Yes I do use the load equalizing bars...when I put both quads in the trailer I did try adjusting the height of the hitch and it helped a bit but can't remember if I tried adjusting the tension on the bars. I might have to give it another try next spring and see how it goes. I'm sure I will have to adjust my setup a bit to get it to work well with a newer/bigger truck too.
 

OVERKILL 19

Active VIP Member
Joined
Dec 22, 2006
Messages
3,420
Reaction score
1,933
Location
Red Deer
Bigger truck shouldn't change trailer sway....it will probably just Handel it better
 

Lococoin

Active VIP Member
Joined
Aug 8, 2007
Messages
738
Reaction score
183
Location
Airdrie, Alberta
I used the Hensley arrow for my hitch on my bumper pull. You can drive with one finger in 100 km/h side wind gusts. I would never use anything else.

I've switched to a fifth wheel now so I'm selling it as I doubt I'll ever go back to a tt.

The New Hensley Hitch
 

BIG DAWG

Active VIP Member
Joined
May 3, 2010
Messages
479
Reaction score
370
Location
Delburne Ab
I have a 25' bumper pull toyhauler with a 12' garage. It does fit both of my quads inside the garage but the one time I tried to pull it with both quads inside the swaying was scary as hell....just no way to get enough weight further forward. It's my first travel trailer and I hadn't even considered that it might sway when I bought it, I was just glad I could fit both quads in the garage but was pretty disappointed to find out it wasn't gonna work. Now I put one quad in the back of the truck and one in the toyhauler. With a set of air bags and friction sway controllers it pulls nicely now, but has my Nissan Titan working pretty damn hard..... In my situation the friction sway controllers worked perfectly, might be overkill but I use two of them because they are cheap and the idea of the trailer swaying again scares the crap out of me. I'm going to be upgrading to a diesel for next spring though!

on one of our previous units i simply mounted an extra couple batteries acrosss the front and what a difference that made and who wouldnt love having 4 batteries
 

landownunder

Active member
Joined
Nov 24, 2013
Messages
38
Reaction score
6
Location
Edmonton
on one of our previous units i simply mounted an extra couple batteries acrosss the front and what a difference that made and who wouldnt love having 4 batteries


Thats not a bad idea....I was gonna buy new batteries in the spring time anyway and I was on the fence about buying two 6 Volts vs just replacing the single one it has now. Won't make as much a difference as 4 but even one more battery should help a bit. I usually don't get any sway at all now except if I dump all of the water out and it's really windy.
 

CS989

Active member
Joined
Dec 2, 2012
Messages
66
Reaction score
57
Location
Fort Saskatchewan
I have a 34 ft toyhauler. The best weight distribution hitch that I've used with sway control is the reese straight line. It's a little spendy but worth it.


Sent from my iPhone using Tapatalk
 
Top Bottom