left hand throttle, and throttle safety switch

[noturn]

Was wondering if there would be any electrical issues(over voltage, etc.) if I would disconect the Killswitch/throttle safety to be able to run a powermadd left hand throttle cable system. Can I splice the 2 wires that go to throttle safety and still be able to use the kill switch, or do I need to leave the switch disconected all together. I have disconected the kill switch and am able to get full rpm out it using the left hand throttle.
Just like the idea of not having the left hand throttle cable coming across to the front of the right hand side. Inquiring mind would like to know.

Thanks, Mike

 

[noturn]

Would I be able to just connect the 2 wires on the throttle safety switch and that should keep a closed circut then. Just wondering.
Thanks Mike

 

[srxhair]

what sled do you have?

 

[sledneck_03]

Would I be able to just connect the 2 wires on the throttle safety switch and that should keep a closed circut then. Just wondering.
Thanks Mike

no they are closed circuit loops, on or off, the only draw they would have would be the loss across the distance of the wire unlike a headlight bulb that has allot more draw.