Led headlight bulbs

[Cat401]

Loaded trucks with every ****ing light they can turn on set for a unloaded truck .
Could live with just headlights but have to have the have the bumper lights on as well that aren’t designed for led or HID lights on as well .
Dodged are always on but I guess they don’t default to just headlights when truck is turned off like others .

You can turn the bumper lights off on a Dodge. Nobody bothers with that though...

Agreed....the fog/driving lights can be nasty on some vehicles. Stock ones are not bad but to many guys (including me) have very bright aftermarket fog lights. I'm one of those drivers who switches his driving lights off for oncoming traffic.....unless you have stupid bright fogs that you leave on as you approach me...then mine come back on. I only turn mine on when I am not in traffic...although they do come on automatically with my high beams.

people need to be more respectful on the highways.....I believe bright lights are fine but get them aimed properly and shut off those bright fog/driving lights as you approach other vehicles.

And yes, even though Dodge lights come on automatically, you can be turn them off manually

 

[LennyR]

Yup, and the upgraded bulbs get the blame. I run all kind of aftermarket bulbs (including 55w hid projectors) in my vehicles and no issues with them properly aimed.

How do you mean no issues ? You mean for you or those meeting you ?

 

[BILTIT]

I do not get brighted. If they were blinding people, i would be brighted.

 

[pfi572]

I do not get brighted. If they were blinding people, i would be brighted.

You have projector headlights is the reason .
The only housing that is okay to have HID bulbs in .
Putting HID in a reflective housing just blinds on coming traffic .

 

[BILTIT]

I agree, i also run led bulbs in my car and have no issues either.

 

[pfi572]

I agree, i also run led bulbs in my car and have no issues either.

The correct LED works fine but most distort the light terrible .
A lot put them in and don’t even have them clocked correct .

 

[skegpro]

What's the best bulb replacement to put in 2015 super duty?

 

[pfi572]

What's the best bulb replacement to put in 2015 super duty?

https://youtu.be/FPcE-fWHmww


Bit long but worth the watch .

 

[LennyR]

Got it .

 

[skegpro]

https://youtu.be/FPcE-fWHmww


Bit long but worth the watch .

Hmm maybe just order from these guys?

 

[skegpro]

Who sells GTR Lighting?

 

[Cat401]

i've dealt with the retrofit source a few times for lights and light kits. good quality.

https://www.theretrofitsource.com/

 

[BILTIT]

I have used both the retroshop and retrofit source, nothing bad to say of either.

 

[Ricki Bobby]

Who sells GTR Lighting?

Did you find out anything about these lights? They look like they might be good?

 

[skegpro]

Did you find out anything about these lights? They look like they might be good?

I did but you could only order them outta the usa. And it wasn't possible to color match the headlights and the fogs.

I ordered marimoto 2stroke, led bulbs for the headlights.
And drop in replacement marimoto led fogs.

 

[skegpro]

Ok so I installed the marimoto 2strokes in my 2015 f350.

It won't toggle between brights and dims.

Any ideas?

Has antiflicker module.

 

[MK4TDI]

Ok so I installed the marimoto 2strokes in my 2015 f350.

It won't toggle between brights and dims.

Any ideas?

Has antiflicker module.

May have ended up with a low beam only bulb by accident... not familiar with the Fords, do the DRL run through the high beam circuit or low?

If its high beam circuit and your DRL are also not working I would investigate the grounding on the anti flicker modules.

 

[luvz da mud]

I wish people would. I swear 75% of the trucks i pass at night have aftermarket bulbs aimed too high.

Most likely in factory housings that spray light everywhere.

LED and HID should only be used in proper Projector housings.

 

[MK4TDI]

LED and HID should only be used in proper Projector housings.

Couldnt agree more... and when they are used correctly the light is absolutely fantastic.

 

[skegpro]

May have ended up with a low beam only bulb by accident... not familiar with the Fords, do the DRL run through the high beam circuit or low?

If its high beam circuit and your DRL are also not working I would investigate the grounding on the anti flicker modules.

DRL are working.
I can't tell if I am actually on high beam or low beam.
Thinking low beam cause there is a good cutoff.
Maybe I didn't get the right bulb, are there two models of Morimoto two stroke? h13?