Largest crank run-out spec and still riding!!!!!!! Lets see them numbers!!!!!!

[Circled-Mistake]

2013 Ski-Doo Summit X800 etec

Pulled apart for a buddy

5000km on sled and motor (original top end)

Pulled apart to do top end (Preventative maintenance, sled ran flawless)

.0135" on the dial
.0024" is Max BRP spec

This pic is in a 180deg sweep

 

[Jake jenkins]

I had over 8000 km on my last sled and the run out was 0.0115 and still ran strong


Sent from my iPhone using Tapatalk

 

[tex78]

Mine was 5.5 tho at 5000 km and same at 8000 km when dealer fixed it

I kept a eye on it and it never moved, but wanted new crank for when warranty went off

sent while drinking tea's

 

[takethebounce]

Anything over .010 is horrible, vibrations bad enough to make your hands numb. Most guys don't notice because its progression is slow and they vibrate when idling.

 

[oler1234]

8200km and rolling at 0.004 right now. but I am sure that will change quick.

 

[fredw]

Took a look at my run out today, 2000 km boosted with race tra primary.. 1.5 to 2 thou is all it has.. pretty good

 

[timmus]

2013 Ski-Doo Summit X800 etec

Pulled apart for a buddy

5000km on sled and motor (original top end)

Pulled apart to do top end (Preventative maintenance, sled ran flawless)

.0135" on the dial
.0024" is Max BRP spec

This pic is in a 180deg sweep

View attachment 202308

How often were u rebuilding clutch with that run out

 

[tex78]

How often were u rebuilding clutch with that run out

Probably won't matter with that much lol

sent while drinking tea's

 

[revbyu]

Had 12 thou on an 08 800R - but I contributed it to a very aburt stop over a unexpected drop off !

 

[Bernoff]

Just have to put another 0 in there. .00135 isn't to bad is it?

 

[Caper11]

2013 Ski-Doo Summit X800 etec

Pulled apart for a buddy

5000km on sled and motor (original top end)

Pulled apart to do top end (Preventative maintenance, sled ran flawless)

.0135" on the dial
.0024" is Max BRP spec

This pic is in a 180deg sweep

View attachment 202308

You have .0135"??? Yah thats rather excessive.


Sent from my iPad using Tapatalk

 

[ktmsx350f]

That power fist dial indicator is percision at it's finest ��

 

[Circled-Mistake]

How often were u rebuilding clutch with that run out

Wasnt rebuilt once

 

[Circled-Mistake]

That power fist dial indicator is percision at it's finest ��

Used a fowler too. Same outcome.