Klim Gear Care and Waterproofing

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
Myself and Sledbunnyracing spent a good hour at the show with the Klim rep discussing care and waterproofing of Klim gear. To keep this short, first read the label, due too contrary belief it can and should be washed more often than not.(my understanding at least every 3rd weekend ) Gortex fiber work best clean. Washed in the washer with about half as much soap as a regular load and dried in the dryer at medium heat or hang too dry . If you find that it leaks, this is the product that you should use as I just treated my towagatee bibs , will certainly update this after some deep pow days ! It works on all vortex including motorfist!
967f10d8ae54cb0cba0a3ab4cb1cb5fc.jpg
 

Giver800

Active VIP Member
Joined
Jan 12, 2015
Messages
182
Reaction score
143
Location
Airdrie
Last off-season I had contacted klim about my gear leaking. I had sent them to them for water testing and my jacket failed and was replaced but my pants passed. So they told me everything that you listed. To keep it clean and wash frequently and treat it with the same water proofing spray you posted. So I did all that on my pants and didn't notice any leaks for the season, so I would expect you should see similar results.
 

Caper11

Active VIP Member
Joined
Oct 28, 2007
Messages
9,604
Reaction score
18,824
Location
Edson,Alberta
I looked after my klim pants and jacket. Washed them and used revivex. After 10 years my gear started to leak. I sent my jacket and pants in for testing and they failed. They gave me brand new jacket and pants! I expected to pay prorated balance due to the age of my old suit. Nope.
Im not sure how the others stack up warranty wise but Klim looked after me.
 

tex78

Active VIP Member
Joined
Feb 5, 2010
Messages
17,557
Reaction score
16,989
Location
DA Moose B.C
What should a guy do for boots, klim boots

Can you use this stuff on them too??
 
  • Thread starter
  • Moderator
  • #6

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
With that being said I'm going too use what I have left for product and spray my stompers , there not leaking so will be preventive maintenance , can't hurt too try as part of the directions say dry on medium or hang too dry !Keep in mind, hang too dry is regular cleaning , Heat should be used when product is applied.
 
Last edited:

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,544
Reaction score
14,743
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
People should know that this Is Not a Klim product we are suggesting. It was suggested by Jared Van Hauwaert of Klim (his permission to use his name).
I will email him today about doing boots.
NOTE: Jared said this product will also work with his competitors sledding gear as well.

Thanks to Jared for giving Lyle and Myself so much time.
 
Last edited:
  • Thread starter
  • Moderator
  • #13

catmando

Super Moderator
Moderator
Joined
Nov 7, 2006
Messages
9,048
Reaction score
6,783
Location
Edmonton
Just an update, works great, my stompers are 4 yrs old and still dry as the day I bought them, my Klim bibs, still dry butt at the end of the day. I will continue using this stuff for sure.....2 thumbs up
 

SLEDBUNNYRACING

Bad Bunny
Administrator
Moderator
Joined
Oct 20, 2006
Messages
39,544
Reaction score
14,743
Location
Edmonton Alberta, Canada
Website
www.sledbunnyracing.com
Just an update, works great, my stompers are 4 yrs old and still dry as the day I bought them, my Klim bibs, still dry butt at the end of the day. I will continue using this stuff for sure.....2 thumbs up

I’m about to apply for my next trip. I thought my butt was getting damp last year so wanted to to a test last ride. Yep, gets damp. Will post reviews after next ride.
 

Teth-Air

Active VIP Member
Joined
Oct 16, 2008
Messages
3,781
Reaction score
8,073
Location
Calgary/Nelson
Usually this product works best by itself. Mixing with the other product in the background can lead to wetter pants. Just say'n.


Myself and Sledbunnyracing spent a good hour at the show with the Klim rep discussing care and waterproofing of Klim gear. To keep this short, first read the label, due too contrary belief it can and should be washed more often than not.(my understanding at least every 3rd weekend ) Gortex fiber work best clean. Washed in the washer with about half as much soap as a regular load and dried in the dryer at medium heat or hang too dry . If you find that it leaks, this is the product that you should use as I just treated my towagatee bibs , will certainly update this after some deep pow days ! It works on all vortex including motorfist! //uploads.tapatalk-cdn.com/20171016/967f10d8ae54cb0cba0a3ab4cb1cb5fc.jpg
 

Sledtillded

Active VIP Member
Joined
Nov 3, 2009
Messages
740
Reaction score
2,527
Location
Edmonton
Found the revivex products at Cabellas in Edmonton. FYI. I had a tear in my Klim pants and found a gore Tex repair kit There too. Clean, peel, stick done. Sprayed with the water proof spray. The big test will be the big pow in Mcbride this weekend Lol
9ca2f4fa0c588f3bfdc04c051041dbc8.jpg
 
Last edited:
Top Bottom